Connection cable MINUS with 2 banana plugs and a crocodile clip:   Color black  Length 1.50 meters For connection directly to the device incl. a crocodile clip.   4mm banana plugs molded on both sides with strain relief and bend protection. Re-connectable - any number of plugs can be plugged into each other. Cylindrical contact spring for large area contact in the socket. Gold-plated contact surface for permanently low contact resistance. Fine stranded wire for highest flexibility and to avoid cable breakage. Conductor cross-section 1mm² - suitable for currents up to 25A. Double insulated cable with wear indicator by inner insulation in white -thereby damages at the insulation are immediately recognizable.   Pay attention to good quality for your electroplating and laboratory equipment! These cables have everything that is important for pleasant and durable use: large cross-section, good strain relief, gold-plated contacts and a flexible, yet resistant cable material with double insulation.  

Create Electrically Conductive Surfaces Quickly and Easily Our Silver Conductive Spray is a premium-quality conductive coating formulated with 16 g of real silver to create highly conductive surfaces on non-conductive materials. It is the ideal solution for electroplating preparation, electronic applications, EMI/RFI shielding, prototype development, and industrial manufacturing. The convenient aerosol format provides an even, professional-quality coating, making it perfect for both flat and complex-shaped components. Key Features ✔ High electrical conductivity ✔ Formulated with 16 g of real silver ✔ Easy, uniform spray application ✔ Excellent adhesion on properly prepared surfaces ✔ Fast drying ✔ Ideal primer for electroplating ✔ Suitable for decorative and technical applications ✔ Professional industrial quality Ideal Applications Perfect for: Electroplating preparation Plastic metallization Making non-conductive surfaces electrically conductive Glass metallization Ceramic coating Conductive coating for wood Electronics manufacturing PCB prototyping Electrical contact repair Jewelry manufacturing and restoration Model making EMI shielding RFI shielding ESD protection Decorative metal finishing Preservation and metallization of flowers and natural materials Laboratory and research applications Perfect Base for Electroplating After drying, the conductive coating forms an excellent foundation for electroplating. For optimum plating quality, apply a bright copper electrolyte or acid copper electrolyte before continuing with nickel, silver, gold, rhodium, chrome, or other decorative and functional metal coatings. This process improves adhesion, coating thickness, corrosion resistance, and the final surface finish. Easy Application Clean and degrease the surface thoroughly. Apply a suitable plastic primer if required. Shake the aerosol can vigorously before use. Apply several thin coats using a cross-spray pattern. Allow 5–15 minutes between coats. Let the coating dry completely before electroplating. Technical Specifications Product Type: Silver Conductive Spray Volume: 150 ml Silver Content: 16 g of real silver Application Method: Aerosol spray Purpose: Creating electrically conductive surfaces Suitable for: Brush plating, pen plating, and bath plating Color: Silver Drying Time: Approximately 5–15 minutes between coats Quality: Professional industrial grade Attention! This item cannot be shipped by air freight! Why Choose Silver Conductive Spray? Silver has the highest electrical conductivity of all metals, making it the preferred material for conductive coatings and electroplating preparation. The high silver content ensures excellent conductivity, while the aerosol application provides fast, even coverage on large, detailed, or complex-shaped parts. Whether you are preparing components for electroplating, repairing electrical circuits, or creating EMI shielding, this conductive spray delivers reliable, professional-quality performance. Package Contents 1 × Silver Conductive Spray (150 ml) Safety Information Signal Word: Danger Extremely flammable aerosol. Pressurized container: may burst if heated. Use only in well-ventilated areas. Wear suitable protective gloves and eye protection. Keep away from heat, sparks, open flames, and hot surfaces. Do not spray onto open flames or other ignition sources. Keep out of reach of children. Always read the Safety Data Sheet (SDS) before use.

Copper Conductive Lacquer for Plastic Metallization – Airbrush & ElectroplatingCopper conductive lacquer for metallizing non-conductive surfaces – ideal for preparing plastics, 3D-printed parts, PETG and other non-conductive materials for subsequent electroplating.This copper conductive lacquer allows non-conductive surfaces to be coated with a copper-containing layer, making them suitable for subsequent electroplating. It is particularly suitable for plastic parts, 3D-printed components, PETG and other non-conductive materials.The lacquer can be applied using a brush, sponge or airbrush.Copper Conductive Lacquer for Airbrush ApplicationFor an especially smooth and even coating, the copper conductive lacquer can be applied using an airbrush with a 0.5–0.8 mm nozzle.For thinning, we recommend butyl acetate or a suitable solvent-based lacquer thinner.As a starting point, the following mixture is recommended:100 ml copper conductive lacquer + approx. 10 ml butyl acetateDepending on the airbrush, nozzle size and desired spray pattern, the amount of thinner can gradually be increased to approximately 15%.Before application, thoroughly stir or homogenize the lacquer, as the copper components may settle during storage.For the best results, apply several thin, even coats rather than one thick coat.Metallizing Plastic for ElectroplatingCopper conductive lacquer is specifically designed for preparing non-conductive surfaces for electroplating.After application and complete drying, the coated surface is galvanically copper-plated using an acid copper electrolyte. This creates a continuous metallic copper layer that can subsequently be used as the basis for further electroplating.Typical process:Plastic / 3D-printed part → Copper conductive lacquer → Acid copper electroplating → Further electroplatingThis allows plastic components to be prepared for subsequent gold plating, silver plating, nickel plating and other electroplating processes.Suitable ApplicationsCopper conductive lacquer is ideal for:Electroplating plasticMetallizing 3D-printed partsPETG and other non-conductive plasticsModel making and prototypingTechnical componentsDecorative plastic partsCustom-made and individual componentsPreparing plastic parts for electroplatingCreating a conductive surface as a preparation for galvanic coatingImportant: Conductive Preparation for ElectroplatingThe copper conductive lacquer is primarily intended for metallizing non-conductive surfaces as a preparation for electroplating.The applied lacquer layer is subsequently treated in an acid copper electrolyte to prepare the surface for galvanic copper deposition. The copper electrolyte is therefore not simply used as a thinner or cleaning solution, but forms part of the electroplating process.ApplicationThoroughly clean and degrease the surface.Stir the copper conductive lacquer thoroughly before use.For airbrush application, start with approximately 10% butyl acetate.Apply several thin and even coats.Allow the coating to dry completely.Prepare the surface for galvanic copper plating.Electroplate the surface using an acid copper electrolyte.Once a sufficient copper layer has been deposited, additional electroplating can be carried out.Your BenefitsCopper conductive lacquer allows even complex-shaped plastic and 3D-printed components to be prepared for electroplating. Airbrush application provides particularly uniform coverage and is ideal for larger surfaces, intricate geometries and detailed components.Ideal for anyone looking to electroplate plastic, metallize 3D-printed parts or prepare custom plastic components for professional electroplating.

Alkaline Copper Electrolyte – Cyanide-Free Copper Bath for Acid-Sensitive MetalsProfessional Alkaline Copper Electrolyte for Tank, Pen and Brush PlatingThe Alkaline Copper Electrolyte from Betzmann Galvanik is a high-quality, cyanide-free copper electrolyte for the electroplating of acid-sensitive metals. It has been specially developed to reliably apply firmly adhering copper coatings on materials such as iron, steel, zinc and zinc die-cast alloys.Unlike acidic copper electrolytes, the alkaline copper electrolyte is ideally suited as an adhesion layer and intermediate coating for materials that may be attacked by acidic electrolytes.The electrolyte is suitable for both tank plating and pen/brush plating (tampon plating) and enables uniform, decorative and functional copper coatings at room temperature.Your AdvantagesCyanide-free alkaline copper electrolyteIdeal for acid-sensitive metalsExcellent adhesion on iron and steelVery good leveling propertiesGood throwing powerIntensive, attractive copper colourIdeal intermediate layer before bright copper platingSuitable for tank, pen and brush platingEasy application at room temperatureProfessional quality from Betzmann GalvanikWhy Use Alkaline Copper Plating?Many metals cannot be directly plated with an acidic copper electrolyte. Especially iron, steel and zinc require a special copper strike layer to achieve a permanently adherent copper coating.The alkaline copper electrolyte enables:Strongly adherent copper coatings on iron-based materialsProtection of sensitive base materialsPreparation for further electroplating processesConstruction of high-quality multilayer coating systemsAfter alkaline copper plating, the surface can be further processed with a bright acid copper electrolyte to achieve an especially smooth and glossy finish.Typical ApplicationsIdeal for:IronSteelZincZinc die-cast partsBrassBronzeCopperTinLeadMetal restorationClassic car partsModel makingJewellery manufacturingRepair workTechnical coatingsSuitable Base MaterialsSuitable for:✓ Lead✓ Bronze✓ Iron✓ Steel✓ Copper✓ Brass✓ Zinc✓ Zinc die-cast alloys✓ TinNot directly suitable for:✗ Aluminium✗ Chromium✗ TitaniumAluminium requires suitable pretreatment, for example with an aluminium activator.For unknown materials, a test coating should always be performed before application.Application InstructionsFor optimum results, workpieces must be thoroughly cleaned before copper plating.Remove:OilGreaseDirtOxide layersRustUse clean disposable gloves to prevent renewed contamination from skin oils.The alkaline copper electrolyte already works at room temperature and can be heated if required.The optimum operating temperature range is between 25 and 50 °C.Recommended Layer System for Perfect SurfacesA proven electroplating system:Base Material → Alkaline Copper → Bright Copper → Nickel → Gold / Chromium / Precious MetalsThe alkaline copper electrolyte provides excellent adhesion, while the bright copper electrolyte creates a smooth and highly reflective surface.Technical DataOperating DataCyanide-free alkaline copper electrolytepH value: 8–10Operating temperature: 20–60 °CWorking ConditionsCurrent density: 0.2–1.5 A/dm²Up to 3 A/dm² with solution movementTank Plating:Approx. 1.4 Volts (5 cm electrode distance)Approx. 1.5 Volts (10 cm electrode distance)Approx. 1.7 Volts (20 cm electrode distance)Pen and Brush Plating:2.5–6 VoltsRecommended: 4–5 VoltsAdditional parameters:Plating time: 10–45 minutesDeposition rate:approx. 0.4 µm/min at 1 A/dm² and 20 °CAnode material: Copper AnodeCoating PropertiesUniform copper coatingsExcellent adhesionVery good levelingGood throwing powerAttractive copper colourIdeal preparation for further electroplating processesSupplied AsReady-to-use alkaline copper electrolyteAvailable in various container sizesQuality from Betzmann GalvanikBetzmann Galvanik develops professional electrolytes for decorative and technical surface finishing. The Alkaline Copper Electrolyte is the ideal solution for safe and reliable copper plating of acid-sensitive metals such as iron, steel and zinc and provides the perfect foundation for high-quality multilayer electroplating systems.

Silver Conductive Paint – High-Conductivity Silver Coating for Electroplating, Electronics & Industrial Applications Create Highly Conductive Surfaces on Almost Any Material Our Silver Conductive Paint is a premium-quality, air-drying conductive coating formulated with 45% pure silver to provide outstanding electrical conductivity. It is designed for creating conductive surfaces on both conductive and non-conductive materials, making it an ideal solution for electroplating, electronics manufacturing, industrial applications, laboratories, research, and repair work. Suitable for plastic, wood, paper, glass, ceramics, metals, textiles, composites, and many other materials, this conductive silver paint delivers reliable electrical performance with excellent adhesion and durability.Our recommendation: Afterward, please dip the item for a long time in an acidic copper-brightening bath to achieve a shiny finish. Key Benefits ✔ High electrical conductivity with 45% silver content ✔ Fast air-drying formula ✔ Excellent adhesion to a wide variety of materials ✔ Ideal as a conductive base for electroplating ✔ Suitable for brush, spray gun, airbrush, or dipping ✔ Professional-grade quality ✔ Reliable performance for industrial and laboratory applications ✔ Easy to apply and highly versatile Wide Range of Applications Silver Conductive Paint is suitable for numerous professional applications, including: Creating electrical contacts Repairing printed circuit board (PCB) traces Conductive coating of plastics Metallizing non-conductive surfaces Electroplating preparation EMI/RFI shielding of plastic enclosures Electrostatic discharge (ESD) protection Repairing automotive rear window defroster grids Improving electrical contact resistance in high-current applications Scanning Electron Microscopy (SEM) sample preparation Laboratory and research projects Prototyping and product development Jewelry manufacturing and restoration Decorative and technical electroplating Ideal Base for Electroplating The dried silver coating forms a highly conductive surface, making it the perfect foundation for electroplating processes. Suitable for subsequent plating with: Gold Silver Copper Nickel Rhodium Chromium Palladium Its excellent conductivity promotes uniform current distribution, resulting in smooth, even metal deposits with outstanding adhesion. Easy Application The conductive paint can be applied using: Brush Spray gun Airbrush Dipping process Important: Shake or stir thoroughly before use, as the silver particles naturally settle during storage. Drying Recommendations The coating dries quickly, even at room temperature. Recommended drying times: 20°C (68°F): approximately 30 minutes 80°C (176°F): approximately 10 minutes 150°C (302°F): approximately 5 minutes Drying is possible at any temperature up to 150°C (302°F). Technical Specifications SpecificationValueProduct TypeSilver Conductive PaintSilver Content45 ± 0.2% AgCoverageApproximately 0.5–1.5 g per 100 cm²ThinnerDH 14 GViscosityFord Cup Ø 3 mm, 30–35 seconds at 25°CSurface Resistance0.02–0.04 Ω (depending on coating thickness and drying temperature)Application MethodsBrush, spray gun, airbrush, dippingDrying TemperatureUp to 150°C (302°F)Package Size12 g - 50 g- 100 g - 250 g - 500 g Storage Store in a cool, dry place. Shelf life: up to 12 months under normal storage conditions. When refrigerated, the product remains usable for up to 24 months. Safety Information Read the Safety Data Sheet (SDS) before use. Wear suitable protective gloves and eye protection. Use only in well-ventilated areas. Keep out of reach of children. UFI Code: QN25-FVK7-D003-YUG5 The current Safety Data Sheet is available for download on the product page. Why Choose Our Silver Conductive Paint? Whether you need a conductive coating for electronics, electroplating, laboratory work, industrial manufacturing, or repair applications, our Silver Conductive Paint offers exceptional conductivity, strong adhesion, and reliable long-term performance. Its high silver content, professional-grade formulation, and versatile application methods make it the ideal choice for demanding technical and industrial projects where precision and reliability matter most.

Copper plates:    This accessory is another Real Gold innovation.  It prevents scratches or burn marks caused by the crocodile clip and increases the conductivity on the surface.