Copper Conductive Paint 200 ml – Conductive Metallizing Coating for Electroplating, 3D Prints & Plastics

Bright Nickel Electrolyte – Ready-to-Use Nickel Plating Solution for Tank, Pen and Brush PlatingProfessional Bright Nickel Electrolyte for Highly Glossy, Corrosion-Resistant and Wear-Resistant Nickel CoatingsThe Bright Nickel Electrolyte from Betzmann Galvanik is a premium-quality, ready-to-use electroplating solution developed for depositing brilliant, highly reflective nickel coatings. It is suitable for both decorative and technical electroplating applications and can be used in tank plating, pen plating, and brush plating.The deposited nickel coatings provide excellent corrosion protection, high hardness, outstanding adhesion, and a bright silver-like finish with the characteristic warm tone of pure nickel. Bright nickel is widely used both as an attractive decorative finish and as a functional intermediate layer for subsequent precious metal coatings.This professional electrolyte is suitable for hobby users, workshops, jewelry manufacturers, restoration specialists, and industrial electroplating applications.Your AdvantagesReady-to-use bright nickel electrolyteBrilliant high-gloss nickel finishExcellent corrosion protectionOutstanding wear resistanceHigh chemical resistanceIdeal diffusion barrier for precious metal platingSuitable for tank, pen, and brush platingDecorative and technical applicationsEasy to useProfessional quality from Betzmann GalvanikTypical ApplicationsPerfect for:Jewelry manufacturingJewelry repairWatchmakingClassic car restorationMotorcycle partsAutomotive componentsMechanical engineeringModel makingMetal finishingElectrical contactsElectronic componentsDecorative metal partsIndustrial electroplatingRestoration projectsExcellent Corrosion Protection and Decorative FinishNickel is one of the most important electroplating metals worldwide. Even relatively thin nickel coatings significantly improve corrosion resistance while protecting metal surfaces against humidity, water, air, diluted acids, and alkaline solutions.For maximum corrosion protection, the classic plating sequence is recommended:Copper → Bright Nickel → ChromiumThis combination produces an exceptionally durable, highly reflective, and wear-resistant surface.Bright nickel can also be used as a decorative final finish without an additional chromium layer.Ideal Diffusion BarrierBright nickel is frequently used as an effective diffusion barrier between copper and precious metal coatings. It prevents migration of base metals into the final coating and maintains long-term colour stability.It is the ideal intermediate layer before:Gold platingRose gold platingWhite gold platingSilver platingPalladium platingRhodium platingBlack rhodium platingRuthenium platingChromium platingSuitable Base MaterialsSuitable for plating:SteelIronCopperBrassBronzeSilverGoldNickelNickel alloysStainless steel should first be activated using a suitable Nickel Strike to ensure excellent adhesion.Not suitable for direct plating on:AluminiumTitaniumChromiumZincThese materials require appropriate pretreatment or specialised intermediate coatings.ApplicationBefore plating, all workpieces should be thoroughly cleaned, degreased, and, where necessary, derusted.For best results, follow these preparation steps:CleanDegreaseActivateNickel plateRinseApply additional decorative coatings if requiredThe use of a Nickel Anode is highly recommended to maintain a constant nickel concentration and maximise electrolyte service life.The magnetic properties of ferromagnetic workpieces remain unchanged after nickel plating.Technical SpecificationsElectrolyte DataReady-to-use electrolytepH value: approx. 4Operating temperature: 15–60 °CRecommended Operating ConditionsCurrent density: 0.3–3.0 A/dm²Up to 5 A/dm² with solution agitationTank plating:Approx. 2.8 V (5 cm electrode distance)Approx. 4.0 V (10 cm electrode distance)Approx. 6.6 V (20 cm electrode distance)Pen and brush plating:Approx. 6–12 VoltsRecommended: 8–9 VoltsPlating time: 10–60 minutesDeposition rate: Approx. 0.2 µm/min at 2 A/dm² and 20 °CAnode material: Nickel AnodeCoating PropertiesBrilliant high-gloss nickel finishBright silver-like appearanceCharacteristic warm nickel colourExcellent adhesionOutstanding corrosion resistanceHigh chemical resistanceExcellent wear resistanceEffective diffusion barrierMagnetic properties of the base material remain unchangedSupplied AsReady-to-use Bright Nickel ElectrolyteAvailable in various container sizesQuality from Betzmann GalvanikBetzmann Galvanik develops premium electroplating solutions for decorative and technical surface finishing. The Bright Nickel Electrolyte produces brilliant, uniform nickel coatings with outstanding corrosion protection and is ideal both as a decorative final finish and as a diffusion barrier before precious metal plating in tank plating, pen plating, and brush plating applications.

Copper Electrode Ø 6 mm – High-Purity Copper Anode for Professional ElectroplatingEfficient Copper Plating with a High-Quality Copper ElectrodeThe Copper Electrode Ø 6 mm is manufactured from 99.9% pure copper and has been specially designed for use in tank plating, pen plating and brush (tampon) plating. It provides a continuous and uniform supply of copper ions to the electrolyte, ensuring high-quality, even and strongly adherent copper deposits.Using a copper anode maintains a constant copper concentration in the electrolyte. This improves coating quality, increases process stability and reduces electrolyte consumption.Your AdvantagesManufactured from 99.9% pure copperExcellent electrical conductivityUniform release of copper ionsMaintains a constant copper concentration in the electrolyteFaster and more uniform copper depositionReduces electrolyte consumptionImproves coating qualitySuitable for tank plating, pen plating and brush platingFits standard 6 mm electrode holdersProfessional quality from Betzmann GalvanikWhy Use a Copper Electrode?During electroplating, copper is continuously deposited from the electrolyte onto the workpiece. A copper electrode replenishes the copper ions consumed during the plating process.This provides several important benefits:Stable electrolyte compositionMore uniform coatingsHigher deposition efficiencyLonger electrolyte service lifeLower operating costsTypical ApplicationsIdeal for:Copper electroplatingTank platingPen platingBrush (tampon) platingDecorative copper coatingsTechnical copper coatingsCorrosion protection systemsIntermediate layers before nickel, gold, silver or chromium platingWorkshopsLaboratoriesIndustrial applicationsRestorationModel makingMaterial PropertiesThe electrode is manufactured from 99.9% pure copper and offers:Excellent electrical conductivityUniform dissolution in the electrolyteHigh purityMinimal electrolyte contaminationLong service lifeApplication InstructionsBefore plating:Thoroughly clean the workpieceRemove grease and oilRemove oxides and contaminantsDuring electroplating:Connect the copper electrode as the anode (positive terminal)Connect the workpiece as the cathode (negative terminal)Use a suitable copper electrolyteFollow the recommended voltage and current settings for the electrolyteOccasional cleaning of the electrode is recommended to maintain optimum performance.Technical SpecificationsMaterial: 99.9% pure copperDiameter: 6 mmExcellent electrical conductivitySuitable for standard electrode holdersPackage Contents1 × Copper Electrode Ø 6 mmQuality from Betzmann GalvanikBetzmann Galvanik supplies high-quality electrodes and professional accessories for demanding electroplating applications. The Copper Electrode Ø 6 mm ensures a reliable supply of copper ions and consistently produces uniform, high-quality copper coatings for hobbyists, workshops and industrial users.

Copper Alligator Clip – Soft Negative Contact Clamp for Professional ElectroplatingPremium Copper Alligator Clip for Secure and Gentle Electrical Contact During ElectroplatingThe Copper Alligator Clip BMG-019A has been specifically developed for professional use in tank plating, pen plating, and brush plating applications. Designed exclusively as a negative contact clamp (cathode connection), it provides a secure electrical connection to the workpiece while minimizing the risk of surface damage.Manufactured from high-purity copper, the clip offers outstanding electrical conductivity with very low contact resistance, ensuring stable current transfer and consistent electroplating results. The soft copper jaws help protect delicate surfaces by significantly reducing the risk of scratches or pressure marks during clamping.Unlike zinc-plated steel clamps, the Copper Alligator Clip is rust-proof, zinc-free, and corrosion-resistant, eliminating the risk of zinc contamination of the electrolyte or workpiece. This makes it particularly suitable for high-quality precious metal plating processes such as gold plating, silver plating, rhodium plating, palladium plating, platinum plating, and ruthenium plating.Its robust copper construction also provides an exceptionally long service life and can last up to 200 times longer than conventional coated alligator clips under normal electroplating conditions.ApplicationsThe Copper Alligator Clip is ideal for:Tank PlatingPen PlatingBrush PlatingGold PlatingSilver PlatingRhodium PlatingPalladium PlatingPlatinum PlatingRuthenium PlatingCopper PlatingNickel PlatingChromium PlatingCobalt PlatingDecorative electroplatingSelective platingRepair platingSuitable for:JewelersGoldsmithsJewelry manufacturersElectroplating companiesWatchmakersLaboratoriesIndustrial applicationsProfessional workshopsHobby usersProduct BenefitsDesigned specifically as a negative contact clampManufactured from high-purity copperExcellent electrical conductivityVery low contact resistanceSoft copper jaws protect delicate surfacesMinimizes scratches and pressure marksRust-proofZinc-free constructionNo risk of zinc contaminationExtremely durableUp to 200 times longer service life than conventional coated clampsSuitable for all professional electroplating applicationsWhy Use a Copper Contact Clamp?Reliable electrical contact is essential for achieving high-quality electroplated coatings.The Copper Alligator Clip provides:Stable current transferExcellent coating adhesionUniform coating thicknessConsistent plating resultsMinimal electrical lossesGentle workpiece handlingClean precious metal deposits without zinc contaminationBy attaching the clip to a hidden or non-visible area of the workpiece, the contact mark can be kept virtually invisible after plating.Typical ApplicationsIdeal for connecting:JewelryRingsNecklacesPendantsBraceletsEarringsWatch casesEyewear framesCoinsMedalsPrecision componentsPrototype partsEngineering componentsDecorative metal partsCompatibilityThe Copper Alligator Clip is compatible with virtually all electroplating systems and laboratory power supplies.Ideal for use with:Electroplating power suppliesConnection cablesElectrode holdersGraphite electrodesPlatinum electrodesTank plating systemsPen plating systemsBrush plating systemsQuality from Betzmann GalvanikBetzmann Galvanik supplies premium electroplating accessories for professional users worldwide. Our copper alligator clips are manufactured from high-quality copper to provide outstanding conductivity, excellent durability, and reliable long-term performance. They ensure secure electrical contact and help produce consistent, professional electroplating results for jewelry manufacturing, industrial finishing, and laboratory applications.

Conductivity Tester:   With this simple tester you can immediately determine whether the surface is conductive, whether there is a fine layer of paint or whether the chrome plating is only vapour-deposited non-conductive chrome. Delivery without batteries! Attention: Design - manufacturer, model and colour vary!

Copper Plate Electrode (SW10051M) Short Description The Copper Plate Electrode is a large‑area sacrificial anode made from high‑purity copper (≥ 99.9 %) designed for electroplating. It provides a consistent supply of copper ions to the electrolyte, promoting stable baths, uniform deposits and improved conductivity in copper plating applications.  Product Description This plate is manufactured from pure copper, which dissolves evenly into the electrolyte to maintain a consistent metal ion concentration. The flat, broad surface makes it ideal for covering larger workpieces or for use in plating tanks where even current distribution is critical to achieving high‑quality copper coatings. Copper anodes like this plate are typically used in bath electroplating settings and can also serve as a foundation layer before other coatings such as nickel or chrome are applied. Typical Applications Electroplating of copper on metal substrates Bath plating for decorative or functional copper layers Undercoat / intermediate layer before nickel or chrome plating Workshop, lab and production electroplating Applications involving larger workpieces requiring extensive coverage  Key BenefitsCopper Sacrificial Anode Sheet Plate anode made of pure copper for electroplating Sacrificial anode for electrolytic copper plating Copper anode sheet for acidic copper electrolytes, copper (Cu) min. 99.9% (Cu-DHP, CW024A, 2.0090, SF-Cu) Electrolytically deposited copper is used to improve conductivity due to its excellent electrical properties, as well as a barrier layer prior to nickel and chrome plating of steel surfaces to enhance corrosion resistance, and for pre-copper plating of zinc die-castings Sheetthickness 0.7 mm Available in sizes S (25 x 150 mm), M (50 x 80 mm), L (100 x 150 mm), and XL (170 x 200 mm) Custom cuts and sheet thicknesses of 1.0 and 2.0 mm also available upon request (min. 1 m²)Size: L - 100 x 150 mmM - 50 x 80 mmS - 25 x 150 mmXL - 170 x 200 mmMaterial: Copper Thickness: 0.7 mm, 1 mm, 2 mm Purity: 99.9  High copper purity (≥ 99.9 %): clean ion release for consistent baths Broad plate design: promotes uniform current distribution Improved deposit quality: even, durable copper coatings Flexible use: suitable for a range of plating setups Easy integration: fits naturally into standard bath electroplating processes  Usage Instructions Preparation: Thoroughly clean and degrease all workpieces prior to plating. Placement: Position the copper plate electrode as the anode (positive terminal) in the electrolyte. Connect: Attach the electrode to the positive output of your power supply and the workpiece to the negative (cathode). Plating: Adjust voltage and current according to the specific copper electrolyte used. Maintenance: Periodically clean off any buildup to maintain performance and longevity. Conclusion The Copper Plate Electrode is a reliable, versatile accessory for copper electroplating, offering consistent performance and uniform deposition thanks to its large active surface and high material purity — suitable for hobbyists, workshop use and professional electroplating environments alike.

Bright Acid Copper Electrolyte – Ready-to-Use Copper Plating Solution for Tank, Pen & Brush PlatingProfessional Bright Copper Electrolyte for Brilliant, Smooth and Highly Conductive Copper CoatingsThe Bright Acid Copper Electrolyte from Betzmann Galvanik is a premium, ready-to-use electroplating solution developed for producing brilliant, smooth and highly adherent copper coatings. Its excellent leveling properties and high deposition rate make it ideal for both decorative and technical electroplating applications.The electrolyte produces bright copper deposits with outstanding surface quality, often eliminating the need for extensive polishing. It is perfectly suited for tank plating, pen plating and brush plating, delivering professional results for workshops, jewellery manufacturers, restoration specialists and industrial applications.Your AdvantagesReady-to-use bright acid copper electrolyteBrilliant, high-gloss copper finishHigh deposition rateExcellent leveling propertiesUniform coating thicknessOutstanding adhesionHighly conductive copper depositsExcellent ductilityEasy to polishIdeal base layer for precious metal platingSuitable for tank, pen and brush platingProfessional quality from Betzmann GalvanikTypical ApplicationsPerfect for:Jewellery manufacturingJewellery repairWatchmakingElectronicsPrinted circuit boards (PCB)Electrical contactsDecorative metal finishingMetal restorationAutomotive partsClassic car restorationMechanical engineeringModel makingPrototype manufacturingIndustrial electroplatingWhy Copper Plate?Copper is one of the most important metals used in electroplating. It serves as an excellent intermediate layer, improves adhesion between different metals, and provides outstanding electrical and thermal conductivity.Bright copper coatings are commonly used for:Decorative finishesCorrosion protection systemsElectrical conductivityThermal conductivitySurface levelingIntermediate layers before further platingThe excellent leveling capability helps fill minor surface imperfections, resulting in smoother finishes and significantly reducing polishing time.Ideal Base Layer for Gold, Silver, Nickel and ChromiumBright copper is frequently used as the first layer in high-quality multilayer electroplating systems.Typical coating systems include:Copper → Nickel → GoldorCopper → Nickel → ChromiumThe nickel layer acts as a diffusion barrier, preventing copper migration into precious metal coatings and ensuring long-lasting colour stability and corrosion resistance.Suitable Base MaterialsSuitable for direct plating on acid-resistant metals such as:CopperBrassBronzeNickelNickel-plated surfacesSteel, iron and zinc should first receive an alkaline copper strike before applying the bright acid copper layer.Not suitable for direct plating on:AluminiumTitaniumChromiumTinZincThese materials require appropriate pretreatment.ApplicationFor optimum adhesion, all workpieces should be thoroughly cleaned, degreased and, where required, activated before plating.The use of a Copper Anode is recommended to maintain a constant copper concentration and maximise electrolyte life.Technical SpecificationsElectrolyte DataReady-to-use bright acid copper electrolytepH value: approx. 1Operating temperature: 15–40 °CRecommended Operating ConditionsCurrent density: 2.5–5 A/dm²Up to 7 A/dm² with solution agitationTank plating:Approx. 1.1 Volts (5 cm electrode distance)Approx. 1.7 Volts (10 cm electrode distance)Approx. 2.8 Volts (20 cm electrode distance)Pen & Brush plating:1.2–4.5 VoltsRecommended: Approx. 3 VoltsPlating time: 3–30 minutesDeposition rate: Approx. 1 µm/min at 5 A/dm² and 20 °CAnode material: Copper AnodeCoating PropertiesBrilliant bright copper finishExcellent levelingUniform coating thicknessOutstanding adhesionExcellent ductilityHigh electrical conductivityHigh thermal conductivityExcellent polishing characteristicsIdeal base layer for nickel, chromium, gold, silver and palladium platingSupplied AsReady-to-use Bright Acid Copper ElectrolyteAvailable in various container sizesQuality from Betzmann GalvanikBetzmann Galvanik develops premium electroplating solutions for decorative and technical surface finishing. The Bright Acid Copper Electrolyte combines excellent leveling properties, a high deposition rate and brilliant surface quality, making it the perfect choice for professional copper plating as well as a base layer for nickel, chromium, gold, silver and palladium coatings.

Create Electrically Conductive Surfaces Quickly and Easily Our Silver Conductive Spray is a premium-quality conductive coating formulated with 16 g of real silver to create highly conductive surfaces on non-conductive materials. It is the ideal solution for electroplating preparation, electronic applications, EMI/RFI shielding, prototype development, and industrial manufacturing. The convenient aerosol format provides an even, professional-quality coating, making it perfect for both flat and complex-shaped components. Key Features ✔ High electrical conductivity ✔ Formulated with 16 g of real silver ✔ Easy, uniform spray application ✔ Excellent adhesion on properly prepared surfaces ✔ Fast drying ✔ Ideal primer for electroplating ✔ Suitable for decorative and technical applications ✔ Professional industrial quality Ideal Applications Perfect for: Electroplating preparation Plastic metallization Making non-conductive surfaces electrically conductive Glass metallization Ceramic coating Conductive coating for wood Electronics manufacturing PCB prototyping Electrical contact repair Jewelry manufacturing and restoration Model making EMI shielding RFI shielding ESD protection Decorative metal finishing Preservation and metallization of flowers and natural materials Laboratory and research applications Perfect Base for Electroplating After drying, the conductive coating forms an excellent foundation for electroplating. For optimum plating quality, apply a bright copper electrolyte or acid copper electrolyte before continuing with nickel, silver, gold, rhodium, chrome, or other decorative and functional metal coatings. This process improves adhesion, coating thickness, corrosion resistance, and the final surface finish. Easy Application Clean and degrease the surface thoroughly. Apply a suitable plastic primer if required. Shake the aerosol can vigorously before use. Apply several thin coats using a cross-spray pattern. Allow 5–15 minutes between coats. Let the coating dry completely before electroplating. Technical Specifications Product Type: Silver Conductive Spray Volume: 150 ml Silver Content: 16 g of real silver Application Method: Aerosol spray Purpose: Creating electrically conductive surfaces Suitable for: Brush plating, pen plating, and bath plating Color: Silver Drying Time: Approximately 5–15 minutes between coats Quality: Professional industrial grade Why Choose Silver Conductive Spray? Silver has the highest electrical conductivity of all metals, making it the preferred material for conductive coatings and electroplating preparation. The high silver content ensures excellent conductivity, while the aerosol application provides fast, even coverage on large, detailed, or complex-shaped parts. Whether you are preparing components for electroplating, repairing electrical circuits, or creating EMI shielding, this conductive spray delivers reliable, professional-quality performance. Package Contents 1 × Silver Conductive Spray (150 ml) Safety Information Signal Word: Danger Extremely flammable aerosol. Pressurized container: may burst if heated. Use only in well-ventilated areas. Wear suitable protective gloves and eye protection. Keep away from heat, sparks, open flames, and hot surfaces. Do not spray onto open flames or other ignition sources. Keep out of reach of children. Always read the Safety Data Sheet (SDS) before use.

Copper plates:    This accessory is another Real Gold innovation.  It prevents scratches or burn marks caused by the crocodile clip and increases the conductivity on the surface.