Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion  Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.

High-Performance Gold Flash Electrolyte for Professional Results The Gold Flash Gold Electrolyte is a premium electroplating solution designed for selective brush plating, swab plating, and bath electroplating processes. It enables fast, uniform, and highly adhesive gold layers on a wide range of metal surfaces. Perfect for jewelry finishing, repairs, technical applications, and decorative coatings, this electrolyte delivers consistent and reliable results from beginner to professional use. Operating Conditions and Deposit Data (Gold Plating Solution) Voltage Range: 4.0 – 6.0 volts Temperature: 14 – 25 °C Gold Concentration: 2 g/l Electrode Material: Platinum or Carbon (see notes) Gold Content in Deposit: 99.9% (balance: carbon) Plating Rate (at 5.0 V, platinum electrode): approx. 0.12 micron per minute (spot plating) Hardness: 180 – 190 HV Deposit Density: 19.3 g/cm³ Internal Stress: low to medium Storage and Shelf Life Storage Conditions: Protect from direct sunlight Shelf Life: Over 3 years Application Notes The use of stainless steel anodes is strongly discouraged for most plating processes. Plating rates are based on a reference area continuously covered by the swab during operation. Application Instructions (Beginner to Professional) 1. Surface Preparation (Critical Step) Thoroughly clean the surface (remove grease, oil, dirt) Activate the surface (acid dip / activator) Rinse with deionized water  Proper preparation ensures maximum adhesion and durability. 2. Brush Plating (Selective Gold Plating) Parameters: Voltage: 4 – 8 V Movement: steady, circular continuous electrical contact Process: Apply electrolyte to plating brush Connect workpiece as cathode (negative pole) Move brush (anode) evenly across surface Maintain constant movement Stop once desired thickness is reached  Ideal for precision work, repairs, and small areas 3. Swab Plating (Controlled Application) Parameters: Voltage: 5 – 10 V Pressure: light to moderate Movement: uniform, overlapping Process: Soak swab with electrolyte Apply evenly across surface Use overlapping strokes Repeat for thicker layers Ideal for medium surfaces and controlled coatings 4. Bath Electroplating (Full Immersion Process) Parameters: Voltage: 2 – 6 V Current density: 0.1 – 1 A/dm² Time: 30 seconds to several minutes Process: Fill plating bath with electrolyte Connect workpiece as cathode Position anode correctly Immerse workpiece Monitor current and time Rinse and dry after plating Ideal for uniform coatings and professional applications Important Process Guidelines Always work on a clean, grease-free surface Avoid interruptions during plating Maintain stable temperature and voltage Prevent contamination of the electrolyte Use proper rinsing between steps Professional Tips Pre-plating (nickel or palladium) improves adhesion Apply multiple thin layers instead of one thick layer Monitor bath composition regularly Increase voltage gradually for optimal deposition Applications Jewelry plating and restoration Decorative gold coating Electrical contacts and precision parts Workshop and industrial use Why This Electrolyte? This gold electrolyte offers maximum control, excellent adhesion, and brilliant gold finish across all plating methods—making it a reliable choice for both beginners and professionals.

Gold Electrolyte BMG‑072 – High Speed Gold High-Quality High-Speed Gold Plating Electrolyte – 12 g Gold per Liter Short Description The Gold Electrolyte BMG‑072 (High Speed Gold) is a ready-to-use plating solution for fast and high-quality gold deposition on metal surfaces. With 12 grams of gold per liter, this electrolyte allows faster deposition, thicker layers in less time, and coverage of larger areas compared to lower-concentration gold baths. Its hard, uniform, and well-adhering gold layers make it suitable for hobbyists, workshops, labs, and professional industrial applications. Applications High Speed Gold Electrolyte is ideal for: Decorative gold plating (jewelry, pendants, trims) Technical gold plating (contact surfaces, circuit boards, measuring devices) Corrosion protection and durable surface finishing Multi-layer systems, e.g., Copper → Nickel → Gold Partial or full coverage of complex components The higher gold content allows faster results and higher deposition rates than standard gold baths. How it Works (Simple Explanation) Gold is deposited onto metal surfaces through direct current: Polish: Prepare a smooth, high-gloss surface. Clean: Thoroughly degrease (e.g., with an electrocleaner). Activate: Chemically activate the surface (e.g., with an activator). Gold Plating: Apply DC (approx. 4 V) with a platinum or graphite anode to deposit gold. Result: a hard, uniform gold layer with excellent gloss and high durability. Advantages High gold content (12 g/L) for faster deposition and thicker layers Very hard and uniform layers, even for prolonged plating Excellent coverage and adhesion on metals like stainless steel, copper, silver, brass, nickel, iron, and steel Suitable for tank, brush, and tampon plating Versatile for decorative and technical plating in hobby, industrial, or research applications Economical for larger surfaces or frequent use Technical Parameters PropertyValue / RangeElectrolyte typeGold plating solution (High Speed Gold)Gold contentapprox. 12 g/LOperating temperature14–25 °CVoltage range3.0–8.0 V (starting at ~4 V)Recommended anodePlatinum or graphiteGold content in depositapprox. 99.9 % (rest carbon)Deposition rateapprox. 0.7 µm/min at 3.5 V (Platinum anode)Layer hardnessapprox. 220–230 HVDeposit densityapprox. 19.0 g/cm³Voltage stressmediumStorageprotect from direct sunlightShelf life1–2 yearsHazard classHarmful / Irritant Note: Values are typical operational data; slight variations may occur depending on application. Application Instructions Surface preparation: Polish → Degrease → Activate Gold plating: Operate the electrolyte at ~4 V with a platinum or graphite anode Partial plating: Mask areas as needed (e.g., tape, nail polish) Sloped surfaces: Use a leveling agent or thickener to reduce material loss Safety Instructions Gold electrolytes contain chemicals and must be handled safely: Wear chemical-resistant gloves, safety glasses, and protective clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Use only in well-ventilated areas Do not inhale vapors or aerosols Contains small amounts of potassium cyanide (~0.3%) – handle with care Do not ingest; keep out of reach of children Scope of Delivery Gold Electrolyte BMG‑072 – High Speed Gold Quantity according to selection Conclusion The Gold Electrolyte BMG‑072 (High Speed Gold) is a powerful, professional gold plating solution offering faster deposition rates and thicker layers than standard gold baths. It is ideal for decorative, technical, and industrial applications and adheres well to a broad range of metals, including stainless steel, brass, nickel, and steel. Its combination of high gold content, rapid deposition, and ease of use makes it perfect for hobbyists, workshops, and professionals seeking high-quality, durable, and shiny gold surfaces.

Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.

Gold Electrolyte 8 g/L – High-Performance Gold Plating SolutionFast Deposition & Brilliant Gold CoatingsThis high-quality gold electrolyte with 8 g/L gold content is designed for demanding and professional gold plating applications. It enables fast deposition rates, intense gold color, and uniform, highly adhesive coatings.Suitable for bath plating, brush plating, and pad plating – ideal for jewelry, technical components, and industrial use.Key Benefits✔ High gold content (8 g/L) for fast plating results✔ Bright, rich gold color✔ Uniform and highly adhesive coatings✔ Suitable for bath, brush, and pad plating✔ Ideal for professional and industrial applications✔ Compatible with pre-plating (silver, palladium, platinum)Technical SpecificationsParameterValue / RecommendationGold Content8 g/LVoltage (Bath)approx. 2.5 – 4.0 VVoltage (Brush/Pad)approx. 3.0 – 6.0 VTemperature18 – 28 °CpH Valueneutral to slightly acidic (system dependent)ElectrodesPlatinum or graphiteDeposition RatefastLayer Thicknessadjustable via time & current💡 Note: Higher gold content allows faster deposition and thicker layers in a shorter time.ApplicationsJewelry (rings, chains, watches)Electrical contacts and connectorsTechnical componentsRepair and restoration of gold coatingsProfessional and industrial productionWhen to Use 8 g/L Gold ElectrolyteApplicationSuitabilityFast plating⭐⭐⭐⭐⭐Thick layers⭐⭐⭐⭐⭐Professional use⭐⭐⭐⭐⭐Fine decorative plating⭐⭐⭐⭐☆👉 Conclusion: Ideal for users who need efficient, fast, and high-quality gold plating.Application – Step by StepClean and degrease the surface→ essential for adhesionActivate the material→ use an appropriate activatorGold plating process→ apply electrolyte (bath, brush, or pad)Post-treatment→ rinse and finish💡 Pro Tip: Surface preparation determines up to 80% of the final coating quality.CompatibilityThis gold electrolyte can be used with:Galvanic systems (bath plating)Brush plating devicesPad plating systems👉 Also compatible with:Silver, palladium, or platinum pre-platingDifferent electrode types (platinum recommended)Practical ExamplesGold plating a ring within minutesFast coating of electrical contactsConsistent results in series productionFrequently Asked Questions (FAQ)Why use 8 g/L gold electrolyte?It enables faster deposition, thicker coatings, and professional results.Is it suitable for beginners?Yes, with proper preparation and basic knowledge, it is easy to use.How durable is the gold coating?With correct application, the coating is highly durable and wear-resistant.Which electrode is recommended?Platinum electrodes provide the most stable and high-quality results.Recommended AccessoriesPower supplies and rectifiersElectrodes (platinum or graphite)Cleaners and activatorsComplete galvanic systems👉 The right combination of equipment, electrolyte, and electrode ensures optimal results.Order Gold Electrolyte 8 g/L NowAchieve fast, brilliant, and professional gold plating results with a high-performance electrolyte.👉 Order now and start plating with precision and efficiency.

Covering pen for partial coating Betzmann Galvanotechnik:   Use this concealer pen to cover areas that are not to be coated. Simply apply the liquid agent, let it dry and then you can coat. After the process, simply rub off like an eraser.