Rosegold Solution 18 Karat
€60.50
Available, delivery time: 1-2 days
Product information "Rosegold Solution 18 Karat"
Rosegold Solution from Betzmann Galvanik
| Gold Concentration | 9.1g/l |
| Voltage Range (Platinum Electrode) | 2.5 – 3.0 volts* |
| Voltage Range (Carbon Electrode) | 2.0 – 2.5 volts* |
| Electrode | Carbon |
| Alloy consistency (at mix ratio 1Mixer:10 K-Gold) | 75% Gold, 25% Copper |
| Colour designation | 5N |
| Temperature | 20 – 25 °C |
| Plating Rate at (3.3 volts, carbon electrode) | Approx. 0.5 microns per minute (max) |
| Hardness | Hard: In excess of 250 – 300 Hv |
| Density of deposit | 14.4 g/cm3 |
| Stress | Medium |
| Special storage requirements | Away from sunlight |
| Shelf life | 1-2 years (please refer to notes below) |
| Health and Safety classification | Irritant |
| Special considerations | None (cyanide-free) |
| Transport (UN number) | None: Not classified as dangerous for transport |
* The lower voltage range should be applied when using smaller swabs.
Notes:
- Remove any existing layers of rose gold before plating.
- Store in hermetically sealed container with lid firmly closed. Small
- volumes for day-day use should be stored in a stoppered syringe.
- Higher voltages can be used with plating rates in excess of 3 microns
per minute (spot).
A lower voltage range is recommended when plating above 1 micron to prevent
dullness and subsequent polishing.
Similar Items
Graphite round rod - Graphite rod anode - Graphite electrode for gold plating. Graphite electrodes are ultimate for all coatings. The advantage is that in some coatings with stainless steel electrodes, the dislodged metal parts disturb the coating. This does not happen with graphite electrodes, because graphite also filters out contaminated liquids. With bath electroplating, they also need to be replaced occasionally as they slowly dissolve during the plating process. With pad electroplating, simply loosen the screw on the handle and replace with a new one. Diameter 6 mm, length approx. 9 cm Features Used for Doesn’t contaminate Cleaner Activating and electro-cleaning Its resistive properties help to heat the solution you’re plating with Chromium plating, which needs to be plated at 25 degrees celsius; its natural heating action helps to maintain the solution’s optimal temperature Low cost Can be used for all plating processes but carbon electrodes deteriorate over a period of time and discolour swabs (discolouration does not affect the plating quality)
Ultra-fine metal polish from Betzmann GalvanikSuitable for a wide range of applications: Spectacular shine, polishing out minor scratches, removing light rust and oxidation. Can be used on various materials: metals (aluminum, copper, brass, stainless steel, chrome, etc.), plastic, paint, and fiberglass.
Content: 0.1 Liter (€125.00 / 1 Liter)
Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.
Metal Polish Ultra from Betzmann Galvanikis a liquid cleaning and care emulsion for all metal surfaces. The high-quality polishing agents ensure intensive yet gentle cleaning of weathered surfaces and remove stubborn dirt. Gives aged surfaces a new shine. Easy to apply and polish. The product is ideal for large areas.
Content: 0.1 Liter (€128.00 / 1 Liter)