K-Gold - Clear Gold 10 Gramm/L.

Real Gold

€64.00*

Content: 0.05 Liter (€1,280.00* / 1 Liter)

(€53.78 ohne MwSt.)

Prices incl. VAT plus shipping costs

Available, delivery time: 1-2 days

50ml

100ml

250 ml

500 ml

Product number: BMG-083

PDF offer

Create PDF offer for this product Tip: Add multiple products to the cart and create the offer there. Logged in users get an individualized offer.

Product information "K-Gold - Clear Gold 10 Gramm/L."

Product information "Klargold - Clear Gold " by Betzmann Galvanik

Clear gold with 10 grams of gold per liter is just like the gold flash - wonderfully suitable as an intermediate layer or decorative layer.

Betzmann Galvanik's Clear Gold has the following main applications:

1. for mixing with Rose Gold Mixer - White Gold Mixer - Green Gold Mixer or Goldweisser. The hardness additives are in the respective mixer liquids. You can find the instructions in the respective item description and guide.

2. Optical-decorative layer:

Gold is soft and requires the addition of cobalt as a hard abrasion resistant top layer, which is not included in this product.

Therefore, the gold layer from the Clear Gold appears slightly lighter yellow.

Parts that are not subject to stress, such as souvenirs, horseshoes for decoration, etc., can be easily, directly and inexpensively gilded with the Clear Gold.

Tip: You can first very intensively and thickly gild parts with the clear gold, because the high proportion of gold very quickly and thick gold layers and then coated briefly with the 8 or 12 grams cobalt-displaced hard gold!

3. bonding primer for the following coatings:

Many applications require thin layers of gold before actual plating.

With the Clear Gold from Betzmann Galvanik you can apply the desired gold layer.

As an example, direct silver plating of nickel is usually not feasible, so you can first gold plate with the Clear Gold, then silver plate.

Likewise, when using black chrome, rose gold plating, green gold plating, the clear gold serves as an optimal bonding base when copper or nickel cannot be applied directly!

Also, the gilding of nickel, which naturally oxidizes, is very easy and spotless possible.

Then chrome plating on clear gold can be done even easier and without problems.

Recommended electrode: platinum electrode, graphite electrode

Voltage: from approx. 4 volts

Cyanide free

Procedure:

Polishing if necessary

Degreasing

Activate

Clear Gold

Continue with the top coat chrome, white gold, rose gold, green gold

Features	Used for
Designed mainly as a base solution for mixing with our Coloured Gold Mixers	Mixing with Yellow, White, Rose, and Green Gold Mixers and Brass Effect Gold Mixer.
Can be mixed with 2 or more Gold Mixers	Creating a huge spectrum of different shades and tints of gold – good for exactly matching colour of original gold plated layer
Can be plated on its own, forming a soft, 24 carat gold layer, completely cyanide free	Mainly functional purposes only. Needs a Gold Flash undercoat if plating on to stainless steel

GHS07

Signalword: Warning

H-phrases:

H332 Harmful by inhalation.

H312 Harmful in contact with skin.

H302 Harmful if swallowed.

P phrases:

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301 IF INFECTED:P310 Immediately call a POISON CENTER/doctor/

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar Items

Gold Whitener

Gold whitener from Betzmann Galvanik - This new mixer liquid can be used in conjunction with our normal gold electrolyte to create different lighter gold tones, such as 18 carat gold. You simply mix in a ratio of 2:10 ml (2 ml gold whitener and 10 ml gold electrolyte) to create an 18 carat gold tone. The more gold whitener you add, the brighter the gold will be. Can also be applied pure! Gold brightener: When mixed with our Gold Electrolyte, it creates many different shades of gold, from a hue similar to 18 karat yellow gold, to pale yellow, to a grayish hue common to white gold alloys. Features / Advantages The Gold Weisser can be mixed with our standard gold plating solution in a ratio of 2 to 10. Bleaches back the hue of our standard gold solution to create a finish similar to most common 18-karat gold tones No need to buy another base solution - just mix it with our standard gold. You can add more Gold Weisser to lighten the shade further, or add less to create a richer shade. Great flexibility - you can meet your customers' exact requirements Operating conditions and deposition data Voltage range 3.0 - 5.0 volts Temperature 18 - 25 °C Gold concentration 8 - 4 g/l Electrode Platinum or graphite electrode Gold content in the plate 99.9% (yellow gold) - 75% (gray-white) Deposition rate at (3.5 volts, platinum electrode) approx. 0.5 microns per minute (spot) Hardness of: 220 (yellow gold) - 550 Hv (white gold) Density of deposit 15.0 (yellow gold) - 19.0 g/cm3 (white gold) Voltage Medium voltage - high voltage Special storage conditions NoneShelf life Over 3 years Notes: none We strongly advise against the use of stainless steel anodes for most of our plating processes except for degreasing - activating and dechroming! Coating rates are calculated over a sample area that is permanently covered with a swab.

Content: 0.025 Liter (€952.00* / 1 Liter)

€23.80*

Details

Platinum Electrode

Platinum electrode from Betzmann-Galvanik: We know that when plating with gold or silver, you want to achieve only the best results and this is achieved by using our platinum electrode (platinized titanium). This will more than meet your requirements. It hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, we recommend the use of this electrode. Care should be taken to clean the electrode carefully after each use! Properties "Platinum Electrode 6 mm Platinum electrode (platinized titanium with a platinum layer of 2.5 µm platinum) Ø 6 mm x 100 mm Standard electrode for experiments in electrochemistry (electroplating, electrolysis, ion migration, determination of electrochemical potentials, etc.) Spare platinum electrode for Hofmann decomposition apparatus, electrolyzer Platinum-coated titanium anodes are among the classic anode materials for electroplating because they combine the excellent electrochemical properties of platinum with the good corrosion properties of titanium. They are characterized by a long service life at high current density and are versatile in use. They are equally suitable for platinum and ruthenium baths, for hard chrome plating, as bright rhodium baths and for cathodic corrosion protection. The standard platinum layer thickness is 2.5 μm. In order to achieve the best results when plating with gold (adhesive gold bath, bright gold plating bath) or silver, they are indispensable. This platinum electrode will more than meet your requirements, it hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, I recommend using this electrode. Other possible applications: Water electrolysis/separation of hydrogen and oxygen, water disinfection, production of chlorates (chlorate synthesis) and perchlorates. Recommended operating data: Operating voltage from 3 volts distance anode/workpiece surface 5 cm anodic current intensity (specific current density) max. 75 A/dm² (7.5 mA/mm² = 750 mA/cm²), i.e. a multiple of the values typical in electroplating (0.5 ... 5 A/dm²) pH value: 0 - 11 Bath temperature max. 60 °C

€49.00*

Rosegold Mixer

Rosegold Mixer - Betzmann Galvanoshop: Simply add Rose Gold Mixer to K-Gold to plate fabulously warm, lustrous tones of rose gold.All you need to do is mix the two together to create just the right amount of solution you need. We recommend you buy the mixing kit to make sure you measure out the correct ratios.A 1:10 mix will give you a darker shade of rose gold commonly used for eastern European jewellery,while a mix of 2:10 gives a mix not too dissimilar to highly polished pure copper, however this one does not tarnish. If plating on to stainless steel, nickel or its alloys, first plate a layer of 24 carat gold or Goldflash to give a good, solid base on which to plate your Rose Gold layer. Features Used for Rose gold plate is very hard compared to pure gold. Great for plating items subject to a high-wear environment (jewellery). Plates fast. Reduces plating time. When mixed with K-Gold, creates the classic warm tones of rose gold. Selective plating of a range of personal items for example jewellery and watch cases and straps. Can be used on larger items such as silverware and picture frames. Redder deposits can be obtained by increasing the volume of mixer. Greater flexibility in colour matching. Consistency of alloy throughout process sequence. Very useful especially when plating large work or plating to higher thickness: the shade of gold plated doesn’t change. Instructions for use Carbon Electrode3 – 3.5 volts20 – 25 centigrade Ratio of Rosegold Mixer to K-Gold Shade Produced Remarks 1:10 Yellow-red shade 18 carat alloy (75% gold, 25% copper). Plates fast (up to 1.5 microns per minute). Bright, hard gloss finish. 1.5:10 (see note below) Becomes redder 15 carat gold alloy (62.5% gold, 37.5% copper) Plates bright and fast. 2:10 (see note below) Red gold 12 carat alloy – (50% gold, 50% copper). If wanting to plate over 0.25 microns, plate until it goes dull, polish with MPU and then plate again. 4:10 (see note below) Red gold Below 10 carat alloy. Tarnishes readilly and not recommended for decorative purposes. Notes: Rose gold mixes above 1:10 are a lot more susceptible to tarnish than mixes of 1:10 and lower Remove any existing layers of rose gold before plating Labeling gem. CLP-VO: Signal word: Caution H315 Causes skin irritation H319 Causes severe eye irritation. H335 May cause respiratory irritation. P261 Avoid breathing dust/fume/gas/mist/vapor/aerosol. P280: Wear protective gloves/protective clothing/eye protection/face protection. P305 IF IN EYES:P351 Rinse cautiously with water for several minutes. P338 Remove any contact lenses if possible. Continue to rinse.

Content: 0.02 Liter (€825.00* / 1 Liter)

From €16.10*

Details

White Gold Mixer

White Gold Mixer: This solution, which is added to K-Gold, allows you to plate hardened white gold.It is completely free of nickel and can be used in all applications where the item is likely to come into contact with skin.White gold, despite its name, is grey in colour. For this reason it is usual to top coat with palladium, rhodium or platinum.White Gold Mixer, in smaller volumes, has a bleaching effect on gold. It can also be used to lighten rose gold forming a light pink colour. It should be plated at 4 volts using a ratio of 2 parts mixer to 10 parts K-Gold. We highly recommend the plating is carried out at room temperature. Features Used for Completely nickel free All applications where item may come in contact with skin Can be used to lighten K-Gold and other gold mixers For example, creating a ‘white gold’ shade when mixed with K-Gold or creating a ‘blush pink’ shade when added to our Rose Gold Mixer

Content: 0.025 Liter (€952.00* / 1 Liter)

€23.80*

Details

Mixer set for measuring

Mixer set for measuring Real Gold Betzmann With this mixer set consisting of 1x measuring cylinder, 2x pipette, 2 x beaker you can mix rose gold, white gold, green gold, etc. in the right proportion exactly.

€14.50*

Anode sleeve fuzzy

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.

€2.38*

Brass Effect Mixer

Ratio of Brass Effect Gold Mixer to K-GoldShade ProducedRemarks1:10Resembles freshly polished 70/30 brass14 carat alloy. May require polishing1.5:10 (see note below)Becomes lighter When plating on to stainless steel, nickel and its alloys, first plate a layer of 24 carat gold using Gold Solution or GoldflashOther informationPlating rate2.6 microns per minute (1:10 ratio, 3 volts, Carbon Electrode)Temperature20 – 25 °CElectrodeCarbonSpecial storage requirementsNoneShelf lifeUp to six monthsHealth and Safety classificationIrritantSpecial considerationsNoneTransport (UN number)None: Not classified as dangerous for transport Notes:The shade can be varied by altering the mix ratio. Increase the ratio for lighter shades; decrease for darker shades. Signal word Warning Hazard statement(s). H316 Causes mild skin irritation. H320 Causes eye irritation. H335 May cause respiratory irritation. Precautionary statement(s) P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/spray. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard none

Content: 0.025 Liter (€1,428.00* / 1 Liter)

€35.70*

Details

Green Gold Mixer

Green Gold Mixer: You can use this mixer to create a range of coloured gold plating solutions that are popular in jewellery making. When plating on to stainless steel, nickel and its alloys, first plate a layer of 24 carat gold using Gold Flash! Operating Conditions and other data Voltage Range Temperature 20 – 25 °C Electrode Carbon Gold content in plate Please refer to Coloured Gold Mixing Calculator Stress Medium Special storage requirements None Shelf life 1 – 2 years Health and Safety classification Irritant Special considerations None Transport (UN number) None: Not classified as dangerous for transport

Content: 0.025 Liter (€1,904.00* / 1 Liter)

€47.60*

Details