Copper Plate Electrode (SW10051M) Short Description The Copper Plate Electrode is a large‑area sacrificial anode made from high‑purity copper (≥ 99.9 %) designed for electroplating. It provides a consistent supply of copper ions to the electrolyte, promoting stable baths, uniform deposits and improved conductivity in copper plating applications.  Product Description This plate is manufactured from pure copper, which dissolves evenly into the electrolyte to maintain a consistent metal ion concentration. The flat, broad surface makes it ideal for covering larger workpieces or for use in plating tanks where even current distribution is critical to achieving high‑quality copper coatings. Copper anodes like this plate are typically used in bath electroplating settings and can also serve as a foundation layer before other coatings such as nickel or chrome are applied. Typical Applications Electroplating of copper on metal substrates Bath plating for decorative or functional copper layers Undercoat / intermediate layer before nickel or chrome plating Workshop, lab and production electroplating Applications involving larger workpieces requiring extensive coverage  Key Benefits High copper purity (≥ 99.9 %): clean ion release for consistent baths Broad plate design: promotes uniform current distribution Improved deposit quality: even, durable copper coatings Flexible use: suitable for a range of plating setups Easy integration: fits naturally into standard bath electroplating processes  Usage Instructions Preparation: Thoroughly clean and degrease all workpieces prior to plating. Placement: Position the copper plate electrode as the anode (positive terminal) in the electrolyte. Connect: Attach the electrode to the positive output of your power supply and the workpiece to the negative (cathode). Plating: Adjust voltage and current according to the specific copper electrolyte used. Maintenance: Periodically clean off any buildup to maintain performance and longevity. Conclusion The Copper Plate Electrode is a reliable, versatile accessory for copper electroplating, offering consistent performance and uniform deposition thanks to its large active surface and high material purity — suitable for hobbyists, workshop use and professional electroplating environments alike.

Copper Brightener (Acid / PP Stabilizer) Short Description The Copper Brightener (acid / PP stabilizer) is a performance additive for acidic and PP copper electroplating solutions that enhances the brightness, smoothness, and quality of plated copper layers. It can also revitalize used electrolyte solutions, restoring their ability to produce highly reflective and even copper finishes. What Is This Brightener Used For? This brightener is used to: Improve the brightness of copper electroplated surfaces Enhance performance of acidic and PP copper baths Refresh spent plating solutions for renewed performance Use in bath and pen plating for both decorative and functional coatings How the Brightener Works (Simple Explanation) Special additives in electroplating solutions help refine the deposition process so that copper deposits smoothly, evenly, and with higher gloss. This brightener is added to the electrolyte and works directly within the plating bath: Prepare and operate your copper electrolyte as usual. Add the brightener: e.g., approx. 4 mL per 1 L of electrolyte. Mix and plate: The electrolyte now deposits highly reflective copper immediately. Benefits of the Copper Brightener Enhanced brightness and surface quality of copper coatings Simple to add to both fresh and used electrolytes Suitable for acidic and PP copper solutions Ideal for bath and pen plating Produces smooth, decorative finishes  Application Notes Recommended dosage: approx. 4 mL additive per 1 L electrolyte Mix thoroughly before plating Performance may vary with electrolyte condition, temperature and current; test runs advised  Safety Instructions Wear protective gloves and eye protection Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Use only in well‑ventilated areas Do not ingest; keep out of reach of children Dispose of chemical waste according to local regulations Conclusion The Copper Brightener (acid / PP stabilizer) is a practical additive that significantly improves the gloss and quality of copper electroplating results. It is easy to use and especially valuable for applications where bright, smooth, high‑quality copper finishes are desired, whether in decorative or functional electroplating. 

Zinc Electrolyte Brightener SW10073 Additive for Smooth, Shiny, and Uniform Zinc Coatings Short Description The Zinc Electrolyte Brightener SW10073 is a specially formulated additive that enhances the surface quality of electroplated zinc coatings. It produces smoother, more uniform, and shinier zinc layers, reduces micro-porosity, and improves corrosion resistance. Suitable for tank plating and brush/pen plating, the brightener is ideal for hobbyists, workshops, and professional applications. Applications The brightener is used to: Increase gloss and uniformity of zinc coatings Reduce micro-pores and uneven surfaces Fine-tune the appearance of zinc layers for decorative or functional purposes Enhance corrosion resistance Ensure uniform coverage on complex geometries Typical applications include repair work, hobby projects, automotive parts, fittings, technical components, and decorative elements. How it Works (Simple Explanation) The brightener influences the zinc ion deposition in the electrolyte, resulting in: Smoother, more uniform layers Fewer “crystal edges” or irregularities Brighter, higher-quality surface appearance The result is a shiny, fine, and uniform zinc coating without additional post-treatment. Advantages Increases the gloss of zinc layers Finer, more uniform structure Reduces micro-porosity Improves corrosion resistance Works in tank plating and brush/pen plating Suitable for hobby, workshop, and professional use Technical Information The brightener is added directly to a zinc plating bath and works only in combination with the corresponding zinc electrolyte: ParameterRecommended RangeConcentrationAdded according to manufacturer instructionsZinc Bath pHAcidic, depending on base electrolyteOperating Temperature15–60 °CVoltage (Tank Plating)0.5–3.5 V (approx. 2 V recommended)Voltage (Brush/Pen Plating)3–7 V (approx. 5 V recommended)Current Density0.25–2 A/dm² (up to 5 A/dm² possible)Anode MaterialZinc or graphite Note: The brightener is an additive, not a standalone plating solution. Practical Application Tips Dosage: Add to the zinc bath according to manufacturer recommendations. Bath Maintenance: Regularly check pH, temperature, and zinc concentration. Polishing: After plating, the surface can be polished for a brighter finish. Bath Agitation: Stirring or air bubbles can improve gloss uniformity. Safety Information Wear chemical-resistant gloves, eye protection, and protective clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Use only in well-ventilated areas Do not ingest; keep out of reach of children Scope of Delivery Zinc Electrolyte Brightener SW10073 Quantity according to selection Conclusion The SW10073 Zinc Electrolyte Brightener improves zinc coatings, making them smoother, shinier, and more corrosion-resistant. Ideal for hobbyists, workshops, and professional galvanizing, it ensures perfect, high-quality zinc surfaces every time.

Copper Electrode Ø 6 mm (BMG-011) Short Description The Copper Electrode Ø 6 mm is a high-purity copper anode (99.9 %) designed for efficient electroplating of copper. It delivers consistent copper ion supply in the electrolyte, enabling fast, even and high-quality copper plating — suitable for bath, pen and pad plating applications. Product Description Made from pure copper (99.9 %), this electrode offers excellent electrical conductivity and controlled copper release into the plating bath. This helps maintain a stable metal content in the electrolyte, improving deposit quality and process reliability while reducing waste and costs. Typical Applications Copper electroplating in various electrochemical setups Bath, pen and pad plating techniques Decorative and functional copper coatings Foundation layers for corrosion protection before further plating Use in workshops, labs and production environments Key Benefits Superior conductivity: ensures stable current flow during plating.  High-purity copper: reduces bath contamination and supports consistent results.  Faster copper ion exchange: improves plating efficiency and finish quality.  Cost savings: can reduce plating solution expenses by up to 40 %–50 % by maintaining bath metal content.  Easy handling: fits standard electrode holders and plating fixtures. Usage Tips Preparation: Thoroughly clean and degrease workpieces before plating. Plating Setup: Connect the electrode to the positive terminal while the workpiece serves as the cathode. Maintenance: Clean the electrode periodically to maintain performance. Compatibility: Best used with copper plating electrolytes in both alkaline and acidic baths. Conclusion The Copper Electrode Ø 6 mm is an essential component for efficient and reliable copper electroplating, offering a balanced combination of performance, cost-effectiveness and ease of use for hobbyists, technicians and professional plaquers alike.

  Silver conductive lacquer (12 grams or 50 grams contains 50% pure silver powder) ready conductive lacquer for application - also suitable for airbrush    For the coating of non-conductive materials such as wood, glass, plastic, this conductive silver lacquer can be used by Betzmann electroplating can be a helpful support.  It should be noted that you must prepare the substrate perfectly so that the paint adheres there optimally. After drying, it will provide a conductive surface and can be coated. Children's shoes, flowers, etc. can thus be coated.  You can apply it with a brush or also with an airbrush gun. The smoother and shinier the paint layer, the higher the degree of gloss of the coating - please use very long and thick acid or copperplate with PP-copper. This brings the gloss!   Conductive silver lacquer, conductive silver - contains 50 % pure silver powder in acrylic lacquer (water-based) The Betzmann Condurctive Silver Ink has many different uses:  "Liquid wire" for model making and electronic work.  Especially suitable for difficult areas. As an artist's paint, for grey metal paints For cars, repair works, preparation for galvanizing, handicraft and painting, model making such as aircraft, ships, railroads.  Adheres to almost all surfaces. If in doubt, make a small test before application. Water-based, solvent-free. The paint dries solid, is highly elastic and water-insoluble with grayish yellow color. And can be painted over with most other paints. High mechanical strength. Quantity depending on the substrate, usually 2-3 strokes with a thin brush. Average grain size under approx. 15µm Keep away from children. Dilutable and brush cleaning with water. Shake well before use, stir up better, also stir up again in between while working the heavy silver particles sink down quickly.      H225 Highly flammable liquid and vapor  flammable. H336 May cause drowsiness or dizziness.  May cause drowsiness or dizziness. H410 Precautionary statements Very toxic to aquatic life with long lasting  effect. P102 Keep out of the reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other  Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.  Do not smoke. P273 Avoid release to the environment. P370+P378 In case of fire: Use sand, extinguishing powder or  alcohol-resistant foam for extinguishing. P391 Take up spillage. P403+P235 Store in a well-ventilated place. Keep cool  P501 Collect in suitable, closed containers and take for disposal.