Kupfer

Copper Electrode Ø 6 mm (BMG-011) Short Description The Copper Electrode Ø 6 mm is a high-purity copper anode (99.9 %) designed for efficient electroplating of copper. It delivers consistent copper ion supply in the electrolyte, enabling fast, even and high-quality copper plating — suitable for bath, pen and pad plating applications. Product Description Made from pure copper (99.9 %), this electrode offers excellent electrical conductivity and controlled copper release into the plating bath. This helps maintain a stable metal content in the electrolyte, improving deposit quality and process reliability while reducing waste and costs. Typical Applications Copper electroplating in various electrochemical setups Bath, pen and pad plating techniques Decorative and functional copper coatings Foundation layers for corrosion protection before further plating Use in workshops, labs and production environments Key Benefits Superior conductivity: ensures stable current flow during plating.  High-purity copper: reduces bath contamination and supports consistent results.  Faster copper ion exchange: improves plating efficiency and finish quality.  Cost savings: can reduce plating solution expenses by up to 40 %–50 % by maintaining bath metal content.  Easy handling: fits standard electrode holders and plating fixtures. Usage Tips Preparation: Thoroughly clean and degrease workpieces before plating. Plating Setup: Connect the electrode to the positive terminal while the workpiece serves as the cathode. Maintenance: Clean the electrode periodically to maintain performance. Compatibility: Best used with copper plating electrolytes in both alkaline and acidic baths. Conclusion The Copper Electrode Ø 6 mm is an essential component for efficient and reliable copper electroplating, offering a balanced combination of performance, cost-effectiveness and ease of use for hobbyists, technicians and professional plaquers alike.

Kupfer Krokoklemme - Kupferklemme Minus:Immer nur im Einsatz als Minus zu verwenden! Damit kann an verdeckter Stelle angehalten oder dasMinus an verdeckter Stelle an geklippt werden. Rostfrei und langlebig. Die sehr weiche Klemme verhindert Kratzer beim Kontaktieren.     Rust proof and long life Zinc free, these clips represent no possibility of contamination – plus they last up to 200 times longer than plated clips.    

Alkaline Copper Electrolyte BMG-093 Alkaline copper electrolyte for electroplating metal surfaces Short Description The Alkaline Copper Electrolyte BMG-093 is a ready-to-use alkaline (basic) solution for electroplating copper onto metal parts. Unlike acidic copper electrolytes, this alkaline copper bath is especially suitable for acid-sensitive materials such as iron, steel, or zinc. It is easy to use and produces smooth, uniform copper layers that can serve either as a protective coating or as an intermediate layer for further electroplating processes such as nickel or chromium plating. What is this alkaline copper electrolyte used for? The alkaline copper electrolyte is used to electroplate metal surfaces with a copper layer in order to: protect metal parts against corrosion create a smooth and even copper surface provide an ideal base layer for further coatings (nickel, chromium, precious metals) allow copper plating on acid-sensitive metals such as steel, iron, or zinc Typical applications include: restoration and repair work corrosion protection of steel and iron parts preparation for multi-layer electroplating systems hobby, craft, and small-scale professional projects How does copper plating work? (simple explanation) In electroplating, copper is transferred onto a workpiece using electrical current: The workpiece is thoroughly cleaned and degreased It is connected as the cathode (negative pole) A suitable anode (e.g. copper sheet or copper wire) is connected as the positive pole When direct current is applied, copper ions from the electrolyte are deposited evenly onto the surface The result is a thin, uniform copper coating with a characteristic reddish metallic appearance. Advantages of Alkaline Copper Electrolyte BMG-093 suitable for acid-sensitive metals easy to use, also suitable for beginners produces uniform and decorative copper coatings ideal as a base layer for nickel or chromium plating suitable for tank plating, brush plating, and pen plating cyanide-free and easy to handle proven electrolyte from professional electroplating technology Technical Parameters PropertyValue / RangeNotesElectrolyte typeAlkaline copper electrolytebasic, cyanide-freepH valueapprox. 8–9alkaline rangeOperating temperature20–60 °Croom temperature to slightly heatedVoltage (tank plating)approx. 1–2.5 Vrecommended from ~1.5 VVoltage (brush / pen plating)approx. 2.5–6 Vrecommended ~4–5 VCurrent densityapprox. 0.2–1.5 A/dm²up to ~3 A/dm² with agitationDeposition rateapprox. 0.4 µm/min at 1 A/dm²typical plating rateAnode materialCopper (preferred), nickel, or suitable inert anodescopper recommendedSuitable substratesSteel, iron, zinc and other metalsideal for acid-sensitive materialsNot suitable forAluminum, chromium, titanium (without special pretreatment)testing recommended (Values represent typical operating parameters for alkaline copper electrolytes.) Practical Application Notes Surface preparation is critical: remove grease, oil, oxides, and rust before plating Copper anodes help maintain a stable copper concentration in the bath Gentle bath movement improves coating uniformity Copper layers are an excellent base for subsequent nickel or chromium plating Safety Information Although this alkaline copper electrolyte is cyanide-free, it is still a chemical product: Wear chemical-resistant gloves and safety goggles Avoid contact with skin and eyes Use only in well-ventilated areas Do not inhale vapors or aerosols Keep out of reach of children and unauthorized persons Scope of Delivery Alkaline Copper Electrolyte BMG-093 Quantity according to selection Important Notice This product requires basic knowledge of electroplating. For optimal results, we recommend using suitable pre-treatment and post-treatment products from our range.

Acid Copper – Bright Copper Electrolyte BMG-095.1 Acid bright copper electrolyte for high-gloss copper electroplating Short Description The Acid Bright Copper Electrolyte BMG-095.1 is a high-quality electroplating solution designed for electroplating copper onto metal surfaces. It is suitable for tank plating as well as brush / pen plating and produces very smooth, bright and uniform copper coatings with excellent electrical conductivity and mechanical properties. This acidic copper electrolyte is more powerful than alkaline copper systems and is used whenever high surface quality, strong adhesion and excellent brightness are required. What is this electrolyte used for? The acid bright copper electrolyte is used for electroplating conductive metals in order to: provide corrosion protection create decorative, high-gloss copper surfaces serve as an intermediate layer for further coatings (nickel, silver, gold, chromium) improve electrical and thermal conductivity build complex multilayer systems such as copper → nickel → chromium or copper → nickel → gold How does copper electroplating work? (simple explanation) In electroplating, copper is deposited onto a workpiece using direct electrical current: The workpiece is thoroughly cleaned and degreased It is connected as the cathode (negative pole) A suitable anode (copper or graphite) is connected as the positive pole When current is applied, copper ions migrate from the electrolyte and form a copper layer on the surface The result is a smooth, bright and conductive copper coating. Advantages of the Acid Bright Copper Electrolyte Produces high-gloss, uniform copper coatings Excellent electrical conductivity Suitable for tank plating and brush / pen plating Ideal as a base layer for nickel and decorative metal coatings Good polishability, reducing post-polishing effort Reliable performance when operated within recommended parameters Technical Parameters The following values represent typical operating parameters for acid bright copper electrolytes: PropertyValue / RangeElectrolyte typeAcid bright copper electrolytepH valueapprox. 1Operating temperature15–50 °CVoltage (tank plating)0.5–2.5 V (recommended ~1–1.5 V at 10 cm electrode distance)Voltage (brush / pen plating)1.2–4.5 V (recommended ~3 V)Current density0.6–5 A/dm² (up to ~7 A/dm² with agitation)Deposition rateapprox. 1 µm/min at 5 A/dm² and 20 °CAnode materialCopper or graphiteSuitable substratesCopper, brass, stainless steel, acid-resistant metalsNot suitable without pretreatmentAluminum, chromium, zinc, tin, titanium Important: Acid-sensitive metals such as steel, iron or zinc must first be pre-plated with an alkaline copper electrolyte before using this acid copper system. Practical Application Notes Surface preparation: Thorough degreasing and cleaning are essential No grease, fingerprints or residues should remain on the surface Tank plating: Maintain recommended voltage and current density Keep appropriate distance between anode and cathode Brush / pen plating: Keep the plating pad in constant motion for uniform deposition Temperature: Can be used at room temperature or heated up to 50 °C for improved deposition behavior Safety Information Acid copper electrolytes contain acidic components and copper salts and must be handled carefully: Wear chemical-resistant gloves, safety goggles and protective clothing Avoid contact with skin and eyes In case of contact, rinse immediately with plenty of water Use only in well-ventilated areas Do not inhale vapors or aerosols Do not discharge into drains or the environment Keep out of reach of children Always observe the Safety Data Sheet (SDS) and applicable hazard labeling. Scope of Delivery Acid Bright Copper Electrolyte BMG-095.1 Quantity according to selection Conclusion The Acid Bright Copper Electrolyte BMG-095.1 is a professional electroplating solution for producing bright, smooth and conductive copper coatings. It is ideal both as a stand-alone copper finish and as a high-quality base layer for further electroplating processes. When used correctly, it delivers reliable, professional results for both beginners and experienced users.

Copper Brightener (Acid / PP Stabilizer) Short Description The Copper Brightener (acid / PP stabilizer) is a performance additive for acidic and PP copper electroplating solutions that enhances the brightness, smoothness, and quality of plated copper layers. It can also revitalize used electrolyte solutions, restoring their ability to produce highly reflective and even copper finishes. What Is This Brightener Used For? This brightener is used to: Improve the brightness of copper electroplated surfaces Enhance performance of acidic and PP copper baths Refresh spent plating solutions for renewed performance Use in bath and pen plating for both decorative and functional coatings How the Brightener Works (Simple Explanation) Special additives in electroplating solutions help refine the deposition process so that copper deposits smoothly, evenly, and with higher gloss. This brightener is added to the electrolyte and works directly within the plating bath: Prepare and operate your copper electrolyte as usual. Add the brightener: e.g., approx. 4 mL per 1 L of electrolyte. Mix and plate: The electrolyte now deposits highly reflective copper immediately. Benefits of the Copper Brightener Enhanced brightness and surface quality of copper coatings Simple to add to both fresh and used electrolytes Suitable for acidic and PP copper solutions Ideal for bath and pen plating Produces smooth, decorative finishes  Application Notes Recommended dosage: approx. 4 mL additive per 1 L electrolyte Mix thoroughly before plating Performance may vary with electrolyte condition, temperature and current; test runs advised  Safety Instructions Wear protective gloves and eye protection Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Use only in well‑ventilated areas Do not ingest; keep out of reach of children Dispose of chemical waste according to local regulations Conclusion The Copper Brightener (acid / PP stabilizer) is a practical additive that significantly improves the gloss and quality of copper electroplating results. It is easy to use and especially valuable for applications where bright, smooth, high‑quality copper finishes are desired, whether in decorative or functional electroplating. 

PP Copper Electrolyte BMG‑130.1 High-Gloss Copper Plating Solution for Electroplating Applications Short Description The PP Copper Electrolyte BMG‑130.1 is a high-performance electroplating solution for depositing bright, uniform copper layers. It produces thick, glossy coatings suitable for decorative surfaces, functional layers, or as a foundation for further electroplating processes such as nickel or gold. Applications The PP Copper Electrolyte is versatile and can be used for: Electrolytic copper plating of metallic surfaces Protective layers on iron and steel for corrosion resistance Intermediate layer or primer for nickel, gold, or other metals Coating conductive paint on plastics Decorative copper-red finishes Solderable layers for PCBs and electronic boards Its balanced composition makes it suitable for both hobbyist and professional applications in workshops, labs, or industrial environments. How Copper Electroplating Works (Simple Explanation) Electroplating uses direct current (DC) to reduce copper ions from the electrolyte onto the surface: Prepare the workpiece: Clean and degrease. Plating: Connect the workpiece as the cathode; use a graphite or copper anode. Deposition: Copper forms a thick, glossy layer. Post-treatment: Rinse with water and dry – the surface exhibits the characteristic bright copper-red shine. Benefits of PP Copper Electrolyte BMG‑130.1 Bright, uniform, glossy copper layers Thicker deposits than many standard copper solutions Excellent adhesion on conductive substrates Ideal as a base layer for nickel, gold, or other metals Easy to use with graphite or copper anodes Versatile application on plastics with conductive paint Technical Parameters (Guideline Values) PropertyValue / RangeProduct typePP Copper ElectrolyteElectrolyte typeBright copper plating solutionVoltageapprox. 3 V and aboveTemperature14–25 °CCopper content> 60 g/LDeposition rateapprox. 2 µm/min at 3.5 VLayer hardnessapprox. 380–385 HVLayer density8.8 g/cm³Anode materialGraphite or copperApplicationBath, pen, or tampon electroplating Note: Values are practical guidelines; results may vary depending on equipment, voltage, and temperature. Practical Application Instructions Preparation: Clean and degrease surfaces. For non-conductive parts, apply a conductive paint first. Plating: Operate the electrolyte within recommended voltage and temperature ranges. Use graphite or copper anodes for uniform layers. Post-Treatment: Rinse plated parts with water and dry. Light polishing can further enhance gloss if desired. Safety Instructions Wear protective gloves, goggles, and appropriate clothing Avoid contact with skin and eyes Rinse immediately with water if contact occurs Work in well-ventilated areas Do not ingest; keep out of reach of children Dispose according to local chemical waste regulations Conclusion The PP Copper Electrolyte BMG‑130.1 is a high-performance and versatile solution for producing bright, uniform copper layers. Whether for decorative finishes, corrosion protection, or as a foundation for further electroplating, it provides excellent layer quality, easy handling, and professional results for hobbyists, workshops, and industrial applications.