Gold Solution 8 Gramm / Liter

Real Gold

€60.69*

Content: 0.05 Liter (€1,213.80* / 1 Liter)

(€51.09 ohne MwSt.)

Prices incl. VAT plus shipping costs

Available, delivery time: 1-2 days

50ml

100ml

250 ml

500 ml

1000ml

2000 ml

5000 ml

Product number: BMG-067

PDF offer

Create PDF offer for this product Tip: Add multiple products to the cart and create the offer there. Logged in users get an individualized offer.

Product information "Gold Solution 8 Gramm / Liter"

PRODUCT PRESENTATION - GOLD ELECTRTOLYT 999 FINE GOLD - 23,8 CARAT

WITH 8 GRAMS OF GOLD PER LITER

Do-it-yourself gold plating has never been so easy. Our gold electrolyte from Betzmann Galvanik may be purchased by anyone. Whether it is for use in highly professional laboratories, industry, luxury companies, to the use in the hobby, main or secondary trade, companies, schools, universities, TH , IHK or other authorities.

With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly:

Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel,

The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition.

The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe.

Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative causes a very long shelf life of at least 2 years and prevents sedimentation, as it occurs with many other gold electrolytes.

The gold electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more.

Partial coatings are possible by masking and masking surrounding areas.

To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc..

Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold!

Optimal results are achieved with the platinum electrode 6mm - 10cm length or the flat platinum electrode, because platinum electrodes can build up very thick layers far over 10 microns and more.

Graphite electrodes can also be used.

Gold content: 8 grams per liter

The procedure for gilding:

Recommended to first polish the surface to a shine - the nicer the surface, the nicer the shine will be

Thorough degreasing with the electrocleaner

Activate the surface with the activator

Gilding with platinum electrode starting around 5 volts

Voltage Range	3.0 – 8 volts
Temperature	14 – 25 °C
Gold Concentration	8 g/l
Electrode	Platinum or Carbon (see notes)
Gold content in plate	99.9% (balance carbon)
Plating Rate at (3.5 volts, Platinum electrode)	Approx. 0.7 micron per minute (spot)
Hardness	220 – 230 Hv
Density of deposit	19.0 g/cm3
Stress	Medium stress
Special storage requirements	Away from sunlight
Shelf life	1 – 2 years

GHS07cBeWAatKcYluY

Signalword: Warning

H-phrases:

H332 Harmful by inhalation.

H312 Harmful in contact with skin.

H302 Harmful if swallowed.

EUH032 Contact with acids liberates very toxic gas.

P phrases:

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar Items

Metal Polish Ultrafine

MPU Fine is as the name implies; a fine version of our MPU. It is ideal when working on thin flash coatings of gold as it removes the minimum of metal. If further plating is required, just as with Ultra, then all you have to do is wipe well with a clean paper towel and continue plating.As the particle size is no more than the wavelength of visual light, there is no chance of leaving any scratch.The scratch-free property of MPU makes it excellent for polishing very soft surfaces such as gold and silver plate. Even the smallest solid contaminant on a swab or final polishing cloth will produce a scratch in gold and silver. MPU fine polishes these scratches out whilst protecting the properties of the plated layer. Features Used for Fine version of MPU Working on thin flash coatings of gold as it removes the minimum amount of metal. As with MPU, if further plating is required all you have to do is wipe well with a clean paper towel and continue plating Particle size of MPU Fine no more than the wavelength of visual light No chance of leaving a scratch on even the softest of metals, such as gold or silver plate – great also for removing scratches in plastic and glass

Content: 0.1 Liter (€125.00* / 1 Liter)

€12.50*

Details

Anode sleeve fuzzy

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.

€2.38*

Anoden Stoffpad dick Mehrlagig

Anodenstoffpad - Anodenhüllen dick mehrlagig - Ersatzhüllen für die Tampon Galvanik von Betzmann Real Gold Dieser dicke Pads besteht aus mehreren zusammen genähten Lagen Stoff und eignet sich hervorragend für die Beschichtung größerer Flächen, aber auch für Teile mit Gittern wie z.B. einKühlergrill usw. Am unteren Ende befinden sich 2 Einschublöcher für den Anodenstab. Falls dieser sich oben schon durch den Stoff gearbeitet hat, kann man den Pad durch Einstecken in das andereEinschubloch weiterhin benutzen. Bitte vor Anwendung den Pad gründlich durchnässen, sonst leitet er nicht. Cotton Sleeve Big: This durable cotton anode Sleeves are custom designed to reach into tight recessed areas. Easy on, easy off, no rubber bands.

€2.50*

Gold Solution 4 Gramm /Liter

PRODUCT PRESENTATION - GOLD ELECTROLYTE 999 FINE GOLD - 23,8 CARAT WITH 4 GRAMS OF GOLD PER LITER Do-it-yourself gold plating has never been so easy. Our Gold Electrolyte from Betzmann Galvanik can be purchased by anyone. Whether it is for use in highly professional laboratories, industry, luxury companies, to the use in the hobby, main or secondary trade, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel, The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition. The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe. Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes. The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating! The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc.. Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more. Graphite electrodes can also be used. Gold content: 4 grams per liter The procedure for gold plating: It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts Operating Conditions and Deposit Data Plating Factor 0.01 A/cm2 Plating rate 0.12 micron per minute at 0.01A/cm2 Maximum plating thickness 4 microns Temperature 18 – 25 °C pH 4.4 – 5.0 Gold concentration 4 grams per litre Agitation Low Electrode Mesh or Platinum Rod Electrode Gold content in plate 99.9% (balance carbon) Cathode efficiency ~25% at Plating Factor = 0.01A/cm2 Hardness 190 – 210 Hv Density of deposit 19.3 g/cm3 Stress Medium Special storage requirements Away from sunlight Shelf life 1 – 2 years Health and Safety classification Harmful Special considerations Contains potassium cyanide (0.15%) Transport (UN number) None: Not classified as dangerous for transport Signalword: Warning H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. EUH032 Contact with acids liberates very toxic gas. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.

Content: 0.05 Liter (€810.00* / 1 Liter)

From €40.46*

Details

Flat Platinum Electrode

Flat Platinum Electrode: For gold plating larger surface areas and other un-complex shaped articles. Size of plating: 4 x 4 cm Features Used for Made from platinised titanium Plating large, flat surface areas 2-3 times faster than a standard rod electrode Electrode dimensions: 4cm x 4cm Ideal for fast gold plating of large un-contoured areas

€70.00*

Gold Flash - Goldflash

Product information "Gold Flash" from Betzmann Galvanik Gold Flash with 2 grams of gold per liter - wonderfully suitable as an intermediate layer or decorative layer. The Gold Flash from Betzmann Galvanik has 2 main areas of application: 1. optical-decorative layer: Gold is soft and needs the addition of cobalt as a hard abrasion resistant top layer, which is not included in this product. Therefore, the gold layer from Goldflash appears somewhat lighter yellow. Parts that are not subject to any stress, such as souvenirs, horseshoes for decoration, etc., can be easily, directly and inexpensively gold-plated with the Goldflash. Tip: You can first gild parts very intensively and thickly with the Goldflash and then coat them briefly with the 8 or 12 gram cobalt-displaced hard gold! 2. bonding primer for the following coatings: Many applications require thin layers of gold before actual plating. Until now, this was only possible with the use of 24 carat gold and was therefore quite costly. cost-intensive. This is now a thing of the past. With the Goldflash from Betzmann Galvanik, you can now apply the desired gold layer. As an example, direct silver plating of nickel is usually not feasible, so you can first gold plate with the Goldflash, then silver plate. Likewise, when using black chrome, rose gold plating, green gold plating, the gold flash serves as an optimal bonding base when copper or nickel cannot be applied directly! Also, gilding nickel, which naturally oxidizes, is very easy and spotless. Then chrome plating on Goldflash can be done even easier and without problems. Despite gold plating, the material input is far below 10 cents per cm2 of surface! Recommended electrode: platinum electrode, graphite electrode Voltage: from approx. 4 volts Procedure: Polishing if necessary Degreasing Activate Goldflash Continue with the top layer chrome, white gold, rose gold, green gold Feature Used for Allows electroplating of a thin layer of strongly adherent gold. Before applying another layer of plating, for example when silver or palladium plating on stainless steel, nickel and its alloys. 24 carat thin coats of gold: electronics, optics – reflectors – and where the item is going to be protected with a clear lacquer layer. Operating Conditions and Deposit Data Voltage Range 4.0 – 6.0 volts Temperature 14 – 25 °C Gold Concentration 2g/l Electrode Platinum or Carbon (see notes) Gold content in plate 99.9% (balance carbon) Plating Rate at (5.0 volts, Platinum electrode) Approx. 0.12 micron per minute (spot) Hardness 180 – 190 Hv Density of deposit 19.0 g/cm3 Stress Low – medium stress Special storage requirements Away from sunlight Shelf life Over 3 years Notes: We strongly advise against the use of stainless steel anodes for most of our plating processes Plating rates are calculated over a sample area which is permanently covered by swab. Features Used for Designed mainly as a base solution for mixing with our Coloured Gold Mixers Mixing with Yellow, White, Rose, and Green Gold Mixers and Brass Effect Gold Mixer. Can be mixed with 2 or more Gold Mixers Creating a huge spectrum of different shades and tints of gold – good for exactly matching colour of original gold plated layer Can be plated on its own, forming a soft, 24 carat gold layer, completely cyanide free Mainly functional purposes only. Needs a Gold Flash undercoat if plating on to stainless steel Signalword : Warning H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INFECTED:P310 Immediately call a POISON CENTER/doctor/

Content: 0.05 Liter (€464.20* / 1 Liter)

€23.21*

Details

MPU - Metal Polish Ultra

MPU is an excellent preparation compound for brush and tank electroplating as it cleans, polishes and activates all in one stage. It quickly creates a water break free surface on a wide range of metals. Features Used One stage cleaning and activating product For cleaning and activating in one stage, can replace the ActiClean stage – saves time and money Can be used during the plating process without having to re-electroclean and activate Clearing burns or other marks produced during plating – all you have to do is rinse and carry on plating

Content: 0.1 Liter (€125.00* / 1 Liter)

€12.50*

Details

Storage Cup transparent

The perfect storage cup for electrode and cloth pad transparent with black lid Large storage beaker - Betzmann Galvanik This stable beaker with screw cap made of PET holds approx. 370 ml. It is practical for storing the electrode with the fabric pad in the respective electrolyte. On request, you will receive the appropriate labeling for the material to be stored. PET can with screw cap clear - 370 ml with plastic screw cap black 70 mm

€2.90*

Dice set - gold-plated

Dice set - gold-plated Type: Gold-plated metal dice Weight: approx. 60g Size: see pictures Material: Copper-zinc alloy Features: 1. the gold numbers in easy-to-read font stand out clearly against the background. 2. the metal dice are made of environmentally friendly material, gold-plated, smooth, lightweight, durable, oxidation-resistant. Scope of delivery: 5 pieces of gold-plated dice

€22.61*

Platinum Electrode

Platinum electrode from Betzmann-Galvanik: We know that when plating with gold or silver, you want to achieve only the best results and this is achieved by using our platinum electrode (platinized titanium). This will more than meet your requirements. It hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, we recommend the use of this electrode. Care should be taken to clean the electrode carefully after each use! Properties "Platinum Electrode 6 mm Platinum electrode (platinized titanium with a platinum layer of 2.5 µm platinum) Ø 6 mm x 100 mm Standard electrode for experiments in electrochemistry (electroplating, electrolysis, ion migration, determination of electrochemical potentials, etc.) Spare platinum electrode for Hofmann decomposition apparatus, electrolyzer Platinum-coated titanium anodes are among the classic anode materials for electroplating because they combine the excellent electrochemical properties of platinum with the good corrosion properties of titanium. They are characterized by a long service life at high current density and are versatile in use. They are equally suitable for platinum and ruthenium baths, for hard chrome plating, as bright rhodium baths and for cathodic corrosion protection. The standard platinum layer thickness is 2.5 μm. In order to achieve the best results when plating with gold (adhesive gold bath, bright gold plating bath) or silver, they are indispensable. This platinum electrode will more than meet your requirements, it hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, I recommend using this electrode. Other possible applications: Water electrolysis/separation of hydrogen and oxygen, water disinfection, production of chlorates (chlorate synthesis) and perchlorates. Recommended operating data: Operating voltage from 3 volts distance anode/workpiece surface 5 cm anodic current intensity (specific current density) max. 75 A/dm² (7.5 mA/mm² = 750 mA/cm²), i.e. a multiple of the values typical in electroplating (0.5 ... 5 A/dm²) pH value: 0 - 11 Bath temperature max. 60 °C

€49.00*

Brass Effect Mixer

Ratio of Brass Effect Gold Mixer to K-GoldShade ProducedRemarks1:10Resembles freshly polished 70/30 brass14 carat alloy. May require polishing1.5:10 (see note below)Becomes lighter When plating on to stainless steel, nickel and its alloys, first plate a layer of 24 carat gold using Gold Solution or GoldflashOther informationPlating rate2.6 microns per minute (1:10 ratio, 3 volts, Carbon Electrode)Temperature20 – 25 °CElectrodeCarbonSpecial storage requirementsNoneShelf lifeUp to six monthsHealth and Safety classificationIrritantSpecial considerationsNoneTransport (UN number)None: Not classified as dangerous for transport Notes:The shade can be varied by altering the mix ratio. Increase the ratio for lighter shades; decrease for darker shades. Signal word Warning Hazard statement(s). H316 Causes mild skin irritation. H320 Causes eye irritation. H335 May cause respiratory irritation. Precautionary statement(s) P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/spray. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard none

Content: 0.025 Liter (€1,428.00* / 1 Liter)

€35.70*

Details

Thickener

THICKENER: Will thicken up any of our solutions, turning them into a non-drip gel Features Used for Creates a gel when mixed with our solutions Resulting gel helps prevent the solution from running off the work. This is particularly useful when you are working in-situ, for example gold plating bathroom taps or an architectural feature of a building, where it is impossible to catch the run-off in the normal drip trays

Content: 0.1 Liter (€155.00* / 1 Liter)

€15.50*

Details