Platinum Mesh Electrode 100 × 40 mm – Platinized Titanium Anode for Electroplating
€112.00
Available, delivery time: 1-2 days
Product information "Platinum Mesh Electrode 100 × 40 mm – Platinized Titanium Anode for Electroplating"
Platinum Mesh Electrode 100 × 40 mm – Platinized Titanium Anode for Professional Electroplating
Premium Platinum Mesh Electrode for Gold, Rhodium, Platinum, Palladium and Chromium Electrolytes
The Platinum Mesh Electrode 100 × 40 mm is a premium platinized titanium anode designed for demanding electroplating applications. Its fine mesh structure provides a significantly larger active surface area, ensuring excellent current distribution and uniform metal deposition across the entire workpiece.
The robust titanium substrate is coated with an approximately 2.7 µm platinum layer, combining the mechanical strength of titanium with the outstanding chemical resistance and electrical conductivity of platinum. The result is reliable, long-lasting and highly reproducible electroplating performance, even when used with aggressive electrolytes and high current densities.
Your Advantages at a Glance
High-quality platinized titanium mesh electrode
Approx. 2.7 µm platinum coating
Large active surface area
Excellent current distribution
Uniform and high-quality metal deposition
Outstanding chemical resistance
Extremely long service life
High current carrying capacity
Minimises electrolyte contamination
Designed for professional tank plating
Premium quality from Betzmann Galvanik
Why Choose a Platinum Mesh Electrode?
The quality of any electroplated coating depends greatly on the anode being used. The open mesh design distributes current evenly across the electrode, resulting in homogeneous metal deposition and superior coating quality.
The platinum coating protects the titanium substrate against corrosion while preventing contamination of the electrolyte. This ensures consistent bath performance and repeatable, high-quality plating results over an extended service life.
Typical Applications
Ideal for:
Gold plating electrolytes
Rhodium plating electrolytes
Platinum plating electrolytes
Palladium plating electrolytes
Rose gold electrolytes
Black rhodium electrolytes
Black nickel electrolytes
Chromium plating electrolytes
Precious metal electroplating
Jewellery manufacturing
Jewellery repair
Watchmaking
Laboratories
Research and development
Industrial electroplating
Professional surface finishing
Benefits of a Platinized Titanium Anode
The combination of titanium and platinum provides numerous advantages:
Exceptional chemical resistance
Excellent electrical conductivity
High mechanical strength
Long operating life
Minimal wear
Uniform current distribution
Reliable electroplating performance
Compared with solid electrodes, the mesh design offers a much larger active surface area, resulting in improved plating uniformity and greater process efficiency.
Application
Before use:
Thoroughly clean and activate the workpiece.
Use a suitable electrolyte.
Position the electrode correctly inside the plating bath.
During electroplating:
Connect the electrode to the positive terminal (+ / anode).
Connect the workpiece to the negative terminal (- / cathode).
Adjust the voltage and current according to the electrolyte manufacturer's recommendations.
After use, rinse the electrode with clean water and remove any residues to maximise its service life.
Technical Specifications
Material: Titanium with platinum coating
Platinum coating thickness: approx. 2.7 µm
Design: Mesh
Dimensions: 100 × 40 mm
Operating voltage: From approx. 3 V
pH range: 0–11
Operating temperature: Up to approx. 60 °C
High anodic current capacity
Package Contents
1 × Platinum Mesh Electrode 100 × 40 mm (Platinized Titanium Anode)
Quality from Betzmann Galvanik
The Platinum Mesh Electrode 100 × 40 mm has been developed for professional electroplating applications where maximum reliability and coating quality are required. Its premium platinum coating, outstanding chemical resistance and long service life make it the ideal anode for precious metal plating and demanding industrial electroplating processes.
Ähnliche Artikel
Product Information "Screw Jar 250 ml Transparent"250 ml plastic screw jar made of transparent polypropylene (PP) with a standard white screw cap made of polyethylene (PE).The transparent plastic jar is particularly suitable for storing ointments, pastes, powders, or free-flowing substances.250 ml Plastic Jar / Transparent Screw JarSpecificationDetailsNominal volume 250 mlDiameter 80 mmHeight incl. lid 58 mmMaximum label height 36 mmJar material PolypropyleneLid material PolyethyleneAppearance TransparentClosure Standard whiteApplication Ointments, creams, powders, free-flowing substancesOther names Plastic jar, screw jar, universal jar
14 Karat Gold Plating Solution – Ready to Use, 1.0 g/L GoldThis ready-to-use 14-karat gold plating solution is designed for decorative gold plating and the deposition of uniform, colour-stable gold coatings. It is particularly suitable for plating nickel surfaces or existing thin gold layers.The electrolyte contains no free cyanide and provides consistent colour results when operated under stable working conditions. Decorative gold coatings with a maximum thickness of approximately 0.1 µm can be deposited.Please note: Variations in operating conditions may affect the colour shade of the deposited gold layer.Technical DataGold content: 1.0 g/L AupH value: 10.5 (range 10–11)Density: 1.035 g/ml (range 1.030–1.040)Gold alloy: 14 karatMaximum coating thickness: approx. 0.1 µmNo free cyanideOperating ConditionsVoltage: 6 VBath temperature: 60 °CPlating time: 15–20 secondsAnode material: Stainless steel, graphite or platinumWorkpiece movement: Required for bath volumes of 10 litres and aboveBath filtration: Required for bath volumes of 10 litres and aboveAnode-to-cathode surface area ratio: approx. 1:1Supply FormReady-to-use gold plating solution with a gold content of 1.0 g/L.
Content: 0.05 Liter (€420.00 / 1 Liter)
X‑Gold Strong / Goldstrike 6 g/L Electrolyte (BMG‑086) High‑Adhesion Gold Strike Plating Solution for Challenging Surfaces Short Description The X‑Gold Strong / Goldstrike 6 g/L Electrolyte (BMG‑086) is a specialized gold plating solution designed to deposit thin, highly adhesive gold layers with a gold content of approximately 6 g per liter. It is formulated to provide excellent adhesion even on difficult‑to‑plate substrates, making it an ideal base layer for subsequent gold or other precious metal coatings. Applications This gold strike electrolyte is suited for: Adhesion gold layers on challenging substrates such as chrome, stainless steel, and dental alloys Base strike layers before thicker gold or decorative coatings Decorative accents and functional surfaces Contact and conductor finishes requiring strong adhesion Applications demanding uniform adhesion and surface coverage How It Works (Simple Explanation) Gold plating uses an electrical current to reduce gold ions from the electrolyte onto the workpiece. This specific formulation promotes strong adhesion, even on materials that are typically difficult to plate: Preparation: Clean and degrease the surface thoroughly Plating: Connect the workpiece as the cathode and apply voltage Deposition: A thin, strongly adherent gold layer forms Further treatment: This base can support thicker or decorative coatings Benefits of X‑Gold Strong / Goldstrike 6 g/L Electrolyte High adhesion on demanding materials Consistent and reliable gold deposition Excellent base layer for subsequent plating Even layer distribution with minimal defects Suitable for bath, pen, and brush plating Useful for decorative and functional applications Technical Parameters (Guideline Values) PropertyValue / RangeElectrolyte typeAdhesion gold/strike solutionGold content6 g/LRecommended voltageapprox. 3–4 VOperating temperature20–25 °CAnode materialPlatinum or carbonDeposition rateapprox. 0.08–0.10 µm/minRecommended layer thickness0.1–0.3 µmDeposit purity~99.5 % goldHardness~180 HV These values are practical guidelines. Results may vary based on equipment, current, temperature, and other factors. Application Tips Preparation: Clean and degrease surfaces thoroughly for optimal adhesion. Plating: Operate within recommended voltage and temperature ranges. Gentle agitation of the solution promotes uniform deposition. Post‑Treatment: Rinse plated parts with clean water and dry. Light polishing can enhance luster if desired. Safety Information Wear protective gloves, eye protection, and suitable clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Work in a well‑ventilated area Do not ingest; keep out of reach of children Dispose of chemical waste according to local regulations Conclusion The X‑Gold Strong / Goldstrike 6 g/L Electrolyte provides thin, highly adhesive gold coatings ideal for use as a base or strike layer on substrates that are otherwise difficult to plate. Its reliability and performance make it a strong choice for both decorative and functional electroplating applications.
Content: 0.05 Liter (€980.00 / 1 Liter)
Gold Flash 2 g/L – Gold Plating Electrolyte for Pen, Tank and Brush/Tampon PlatingVersatile gold electrolyte for decorative plating and galvanic intermediate layersGold Flash Electrolyte with 2 g/L gold is designed for thin decorative gold coatings, selective replating and a variety of electroplating applications. It is suitable for pen plating, tank plating and brush/tampon plating.In addition to decorative gold plating, Gold Flash can be used as a thin galvanic intermediate layer or adhesion layer for subsequent coatings, provided that the base material, surface pretreatment and subsequent plating process are compatible.Gold Flash may also be used as part of coordinated plating processes for producing different gold colours, including white gold, rose gold and green gold. The electrolytes and mixing ratios required for these applications must be appropriately matched.Key BenefitsGold plating electrolyte containing 2 g/L goldSuitable for pen plating, tank plating and brush/tampon platingDesigned for thin decorative gold coatings and replatingPotential use as a galvanic adhesion layer or intermediate layer for subsequent coatingsSuitable for compatible metal surfaces and multilayer plating systemsCan be incorporated into coordinated processes for different gold coloursGold content of the deposited layer: 99.9%, according to the product specificationsDeposition rate of approximately 0.12 µm/min at 5.0 V using a platinum electrodeSpecified current density: 0.1 A/cm²Deposit hardness: 180–190 HVStated shelf life: more than 3 yearsTechnical SpecificationsPropertySpecificationProduct nameGold Flash / GoldflashGold concentration2 g/LVoltage range4.0–6.0 VOperating temperature14–25 °CCurrent density0.1 A/cm²Electrode materialPlatinum or carbonGold content of deposit99.9%Deposition rateApprox. 0.12 µm/min at 5.0 V with a platinum electrodeDeposit hardness180–190 HVDeposit density19.3 g/cm³Internal stressLow to mediumStorageProtect from sunlightShelf lifeMore than 3 yearsPen Plating ApplicationsPen plating is suitable for selectively coating small areas, edges, individual component sections and repair spots. Using a suitable plating unit and pen electrode, specific areas can be plated without immersing the entire workpiece in a plating bath.The specified voltage range is 4.0–6.0 V. The appropriate setting depends on the equipment, electrode, surface condition and process parameters.Brush/Tampon Plating ApplicationsIn brush or tampon plating, the electrolyte is applied to the prepared workpiece using a suitable applicator saturated with electrolyte. This method allows selective plating of larger areas and is particularly useful for components that cannot be fully immersed in a plating bath.The specified deposition rate of approximately 0.12 µm/min was measured at 5.0 V using a platinum electrode on a sample area continuously covered by the applicator. Actual deposition rates may vary depending on the surface geometry, applicator movement and operating conditions.Tank Plating ApplicationsTank plating is suitable for coating compatible workpieces that can be fully or partially immersed in the electrolyte. It can be used for decorative finishes and selected applications in multilayer electroplating systems.For a uniform coating, appropriate surface preparation, electrode positioning and suitable process parameters are essential. The specified operating temperature is 14–25 °C.Gold Flash as an Adhesion Layer for Subsequent CoatingsGold Flash can be used as a thin galvanic intermediate layer to provide a suitable foundation for subsequent coating processes. Depending on the base material and the following plating process, the gold layer may serve as an adhesion layer between the workpiece and a subsequent electroplated coating.The electrolyte is intended for use on compatible metal surfaces. Adhesion depends on appropriate pretreatment, a clean and sufficiently activated surface, and correct coordination of the individual plating steps.Gold Flash can therefore form part of a multilayer electroplating process. Suitability must be evaluated for the specific base metal and subsequent coating.A Basis for Different Gold ColoursGold Flash may be incorporated into suitable plating processes to produce different gold colours, including:White gold: light, silvery-white gold finishesRose gold: warm, reddish-gold finishesGreen gold: greenish-yellow gold finishesThe final colour depends on the composition of the coating electrolytes and the plating process. Gold Flash may be used as part of a coordinated process for achieving the desired finish.Important: Different electrolytes must not be mixed directly without first verifying their chemical compatibility. Follow the relevant manufacturer specifications and validated formulations when producing specific gold colours.Thin Decorative Gold CoatingsGold Flash is designed for thin decorative gold deposits and selective replating. According to the product specifications, the deposited layer has a gold content of 99.9% and a hardness of 180–190 HV.The achievable coating thickness and final result depend on factors including plating time, power supply, electrode configuration, surface condition and the selected plating method.The specified current density is 0.1 A/cm². In practical applications, the appropriate current density may depend on the particular process and plating method.Electrodes and Process NotesPlatinum or carbon electrodes are specified for this electrolyte. The use of stainless-steel anodes is expressly discouraged for most plating processes.The stated deposition rate refers to a sample area continuously covered by the plating applicator. This reference value should not automatically be applied to every workpiece geometry or plating method.Storage and Shelf LifeProtect Gold Flash Electrolyte from sunlight during storage. The stated shelf life is more than 3 years.Gold Flash from Betzmann GalvanikGold Flash Electrolyte 2 g/L offers versatile applications in electroplating and surface finishing. It is suitable for pen plating, tank plating and brush/tampon plating. In addition to decorative gold finishes, it can be incorporated into coordinated multilayer plating systems, including potential intermediate layers and processes for achieving different gold colours.Betzmann Galvanik – Electroplating products and solutions for high-quality surface finishing.
Content: 0.05 Liter (€420.00 / 1 Liter)
Black Nickel Electrolyte (Smoky Nickel) – Ready-to-Use Electrolyte for Tank, Pen and Brush PlatingProfessional Black Nickel Electrolyte for Decorative Dark Grey to Deep Black Nickel CoatingsThe Black Nickel Electrolyte (Smoky Nickel) from Betzmann Galvanik is a high-quality, ready-to-use plating solution designed for depositing decorative dark grey to deep black nickel coatings.The resulting coatings provide an elegant, modern appearance with a uniform colour finish and are widely used in the jewelry, watch, eyewear, design, restoration, and decorative metal finishing industries.Black Nickel is often used as a cost-effective alternative to Black Rhodium or Black Ruthenium. It offers an attractive dark metallic finish, good adhesion, and simple processing.The electrolyte is suitable for tank plating, pen plating, and brush/tampon plating, making it ideal for professional applications as well as repairs, prototypes, and small series production.Suitable Base MaterialsThe Black Nickel Electrolyte can be applied to various properly prepared metallic surfaces, including:NickelCopperBrassBronzeSilverGoldStainless steel (after suitable activation)Nickel-plated surfacesOther electroplated metalsFor optimum adhesion and durability, a suitable intermediate layer such as nickel or palladium may be recommended depending on the base material.Typical ApplicationsIdeal for:Jewelry manufacturingJewelry repairWatch casesWatch strapsEyewear framesWriting instrumentsDecorative metal componentsDesign objectsClassic restoration projectsModel makingCraftsElectroplating workshopsGoldsmithsJewelersProduct AdvantagesReady-to-use Black Nickel electrolyteDark grey to deep black finishElegant smoky nickel appearanceUniform coating formationGood adhesionDecorative final coatingEasy handlingSuitable for tank, pen and brush platingProfessional qualityIdeal for selective platingSuitable for single parts, repairs, and small production runsTechnical DataRecommended Operating ConditionsTank plating voltage: approx. 1.5–4.0 VoltsPen / brush plating voltage: approx. 3–6 VoltsBath temperature: 20–30 °CAnode material: Graphite electrode or Platinum electrodeReady-to-use electrolyteCoating PropertiesDark grey to deep black nickel coatingSatin to slightly glossy appearanceUniform colour distributionGood abrasion resistanceHigh colour stabilityDecorative final finishApplicationBefore plating, the workpiece must be thoroughly cleaned and activated to ensure optimum adhesion.For consistent results, voltage, electrode distance, plating time, and surface preparation should be adjusted according to the workpiece and application.The electrolyte is suitable for both small repair jobs and complete decorative coating of components.Supplied AsReady-to-use Black Nickel ElectrolyteAvailable in different container sizesQuality from Betzmann GalvanikBetzmann Galvanik supplies professional electrolytes for decorative and technical surface finishing applications.The Black Nickel Electrolyte (Smoky Nickel) produces elegant dark grey to deep black nickel surfaces with excellent colour uniformity and easy processing. It is the ideal solution for jewelry, watches, design objects, restoration projects, and decorative metal finishing – providing an attractive and economical alternative to Black Rhodium and Black Ruthenium coatings.
Content: 0.05 Liter (€240.00 / 1 Liter)
Platinum Electrolyte 2 g/L – Ready-to-Use Platinum Plating BathOur ready-to-use acidic platinum electrolyte is suitable for both decorative and technical platinum plating applications. It deposits bright, shiny and corrosion-resistant platinum coatings with a platinum purity of 99.9%.Under optimal operating conditions, coating thicknesses of approximately 0.5 up to a maximum of 1.0 µm can be achieved. The deposited platinum coatings offer excellent chemical resistance and an attractive surface finish.Technical DataPlatinum content: 2.0 g/L PtpH value: below 1 (strongly acidic)Density: approx. 1.08 g/ml, increasing during useDeposited platinum purity: 99.9%Deposit hardness: approx. 500 HVMaximum coating thickness: 1.0 µmOperating ConditionsVoltage: 2 VBath temperature: 30–40 °CPlating time: 2–4 minutesAnode material: Platinized titanium or MOXAnode-to-cathode surface area ratio: approx. 1:1Workpiece movement: RequiredDeposition rate: approx. 11 mg/AminCurrent density: approx. 0.5–1.5 A/dm²Bath filtration: Required for bath volumes of 10 litres and aboveSupply FormReady-to-use platinum plating electrolyte with 2.0 g/L platinum.
Content: 0.05 Liter (€380.00 / 1 Liter)
Brass Effect Mixer BMG-065M – Electroplating Additive for Brass-Like Finishes Short Description: The Brass Effect Mixer BMG-065M is a specialized electroplating additive designed to create brass-like color tones when mixed with a gold electrolyte. By adding this mixer to a standard gold solution, the deposited layer takes on the appearance of classic brass, making it ideal for decorative and functional surface finishes. What is the Brass Effect Mixer? The Brass Effect Mixer is a color-modifying additive that is mixed with a gold electrolyte (such as clear gold or gold flash). It alters the color of the deposited metal layer to resemble traditional brass alloys. Depending on the mixing ratio, the resulting shade can range from classic brass to lighter brass tones. What is it used for? Creating brass-like finishes during gold electroplating Mixing with standard gold electrolytes Fine adjustment of color tones for decorative applications Suitable for workshop, laboratory, and small-scale industrial use Application & Mixing Ratio Standard mixture (1:10): Produces a color similar to polished 70/30 brass alloy (approx. 14 K brass appearance). Lighter tone (1.5:10): Higher mixer ratios result in a lighter brass shade. Color tuning: The exact brass tone can be precisely adjusted by varying the mixing ratio. Recommended electrodes: Graphite electrode – reliable and cost-effective Platinum electrode – for very uniform and refined coatings Technical Information Deposition rate: approx. 2.6 µm/min (1:10 ratio, 3 V, graphite electrode) Operating temperature: approx. 20–25 °C Shelf life: up to 6 months under normal storage conditions Hazard information: Product is irritating – follow safety instructions Key Benefits Enables authentic brass-like finishes using a gold electrolyte Flexible color control through adjustable mixing ratios Compatible with commonly used gold plating solutions Ideal for decorative metal finishes and surface restoration Safety Notes Wear protective gloves and safety goggles during use Ensure adequate ventilation Avoid direct skin contact Follow all safety and handling instructions provided with the product documentation Conclusion The Brass Effect Mixer BMG-065M is a professional electroplating additive for producing brass-colored coatings from a gold electrolyte. With simple mixing and precise ratio control, it allows the creation of a wide range of brass tones – from classic polished brass to lighter variations – making it a versatile solution for decorative electroplating applications.
Content: 0.025 Liter (€1,428.00 / 1 Liter)
White Bronze Electrolyte – Bright Bronze Plating as a Nickel Alternative Bright, Hard and Durable White Bronze Electroplating The White Bronze Electrolyte SW10011.1 from Betzmann Galvanik enables the electroplating of a bright, silvery-white bronze alloy onto suitable electrically conductive metal surfaces. White bronze is particularly suitable as a nickel-free alternative to conventional nickel plating when a bright, hard and wear-resistant surface is required. It can also be used as an intermediate or barrier layer between copper/bronze and a subsequent gold plating. The electrolyte is prepared by mixing the White Bronze component with an alkaline copper electrolyte in a 1:1 ratio. Your Advantages at a Glance Bright, silvery white bronze finish Nickel-free alternative to conventional nickel plating Very fast deposition High deposition rate High hardness Good corrosion resistance Good abrasion and wear resistance Antimicrobial properties Excellent as an intermediate layer before gold plating Suitable for decorative and functional applications Suitable for tank plating and pen/brush plating Suitable for various conductive metal surfaces What Is White Bronze? White bronze is an electroplated bronze alloy with a bright, silvery-metallic appearance. The resulting surface can visually resemble a light nickel coating while offering the advantage of being nickel-free. White bronze is therefore particularly interesting for applications where a bright nickel-free surface is required, including decorative metal components, jewellery and other suitable applications. Preparing the White Bronze Electrolyte The White Bronze electrolyte is prepared by combining the White Bronze component with a suitable alkaline copper electrolyte. Mixing Ratio 1 part White Bronze component : 1 part alkaline copper electrolyte Mix both components thoroughly before use. Important: This product is not a conventional ready-to-use copper electrolyte. It is used together with a suitable alkaline copper electrolyte to produce the White Bronze plating bath. How to Apply White Bronze Electroplating Prepare the electrolyte Mix the White Bronze component and alkaline copper electrolyte in a 1:1 ratio. Prepare the workpiece Thoroughly clean, degrease and activate the surface according to the base material. Electrical connection Connect the workpiece as the cathode (negative pole). Electroplating Apply the appropriate DC current to deposit the White Bronze alloy. Rinsing Thoroughly rinse the workpiece after plating and dry it carefully. Applications White bronze can be used for a wide range of decorative and technical applications. Particularly suitable for: Jewellery Decorative metal components Accessories Metal fittings Technical components Restoration Repair plating Intermediate and barrier layers Underlayers before gold plating Applications where nickel should be avoided White Bronze as a Nickel Alternative One of the key applications is the use of white bronze as a nickel alternative. The deposited layer provides a bright metallic appearance combined with high hardness and good wear resistance, making it an interesting alternative where a bright nickel-like appearance is desired without depositing nickel. For jewellery and suitable objects that come into contact with skin, a nickel-free coating can be advantageous. White Bronze as an Intermediate Layer Before Gold White bronze can also be used as an intermediate or barrier layer between copper/bronze and gold. A typical coating structure can be: Base Material → Copper → White Bronze → Gold The White Bronze layer provides a functional intermediate layer while also creating a bright and attractive surface beneath the final gold coating. Recommended Electrodes For electroplating, graphite or platinum anodes are recommended. Technical Specifications PropertySpecificationProductWhite Bronze ElectrolyteProduct numberSW10011.1Mixing ratio1:1 with alkaline copper electrolyteVoltage3.2–3.5 VMinimum voltageapprox. 3 VOperating temperature18–25 °COptimum temperatureapprox. 22 °CAnodesGraphite or platinumCoating colourBright bronze / silvery bronzeTypical hardness450–500 HVDeposit densityapprox. 8.6–8.8 g/cm³Typical alloy compositionapprox. 42% copper / 58% tinDeposition rateapprox. 0.7–1.5 µm/min, depending on process parametersApplicationTank plating, brush/pen plating The values above are guideline values and may vary depending on the workpiece, electrolyte preparation, current density, agitation and other process parameters. Storage The White Bronze electrolyte and prepared solution are sensitive to air exposure. Therefore: Keep the container tightly closed Minimize unnecessary exposure to air Store in a cool place For the prepared solution, storage at approximately 2–5 °C is recommended Shelf life of the prepared solution under suitable storage conditions: approximately 4 weeks Important Tips for Optimal Results Thorough surface preparation is essential for a high-quality White Bronze coating. The workpiece should generally be: Cleaned → Degreased → Activated → Electroplated During electroplating, uniform movement of the electrolyte can help achieve a more homogeneous deposit. Safety Information When working with electroplating electrolytes, always: Wear suitable protective gloves Wear safety goggles Wear appropriate protective clothing Avoid skin and eye contact Work only in well-ventilated areas Do not ingest Keep out of reach of children Dispose of chemical residues and spent electrolytes according to applicable regulations Always consult the current Safety Data Sheet (SDS) before use. Conclusion The White Bronze Electrolyte SW10011.1 is a versatile solution for producing bright, hard and wear-resistant White Bronze coatings. It is particularly interesting as a nickel-free alternative to nickel, for decorative and functional applications and as an intermediate/barrier layer between copper or bronze and gold. When combined with a suitable alkaline copper electrolyte in a 1:1 mixing ratio, it provides an effective system for fast White Bronze electroplating.
Content: 0.05 Liter (€320.00 / 1 Liter)
White Bronze Electrolyte SW10011.1 Fast plating electrolyte for bright white bronze coatings as an alternative to nickel Short Description The White Bronze Electrolyte SW10011.1 is a brush or bath electroplating solution for depositing a bright white bronze alloy on conductive metal surfaces. When used, it produces an antimicrobial white bronze layer that can replace traditional nickel plating, replicating similar hardness and color while avoiding nickel allergy issues. Real Gold Applications This bronze plating electrolyte is used to: Apply bright white bronze coatings on a variety of metals Replace nickel plating where nickel avoidance is desired Provide corrosion-resistant and antimicrobial layers Act as a barrier layer between copper/brass and gold Create decorative or functional coatings in brush or bath plating Real Gold How It Works (Simple Explanation) White bronze plating is achieved by mixing this electrolyte with an alkaline copper plating solution (1:1) and applying direct current. The bronze alloy deposits as a uniform, bright metallic layer. Real Gold Benefits High deposition rates and efficient operation Nickel-free alternative with similar physical properties Antimicrobial and corrosion-resistant surface Functions as a barrier layer before gold plating Decorative and functional surface finish Compatible with brush and bath plating Real Gold Typical Parameters PropertyValue / RangeElectrolyte typeWhite bronze plating solutionMixing ratio1 part alkaline copper : 1 part White BronzeVoltage3.2–3.5 VTemperature18–25 °C (optimum ~22 °C)ElectrodeGraphite/platinumTypical alloy~42 % Cu / 58 % SnHardness450–500 HVDensity of deposit8.6–8.8 g/cm³Plating rate0.7–1.5 µm/minShelf life~4 weeks if stored correctlyStorage2–5 °C recommendedAir sensitiveYes — keep sealed Safety Information Follow all standard electroplating safety practices: Wear protective gloves, goggles, and clothing Avoid contact with skin and eyes Use in well-ventilated areas Keep out of reach of children Dispose of wastes per local regulations Conclusion The White Bronze Electrolyte SW10011.1 is a versatile plating solution that produces bright, antimicrobial white bronze coatings with mechanical and aesthetic properties close to nickel plating. It is especially useful where nickel use is restricted or undesirable, and as a barrier layer prior to gold plating in both decorative and functional applications.
Content: 0.05 Liter (€320.00 / 1 Liter)
Microfiber Plating Swab for Brush Plating – Up to 8 mm Rod ElectrodesHigh-Quality Replacement Microfiber Swab for Brush Plating and Bath ElectroplatingThis high-quality microfiber plating swab is designed for brush plating and tampon electroplating with compatible electroplating solutions. Suitable for rod electrodes up to 8 mm in diameter, it offers excellent absorbency, a durable stitched construction and versatile application options.Whether you are gold plating, silver plating, copper plating or applying other compatible electroplated coatings, a suitable plating swab is an essential accessory for controlled and efficient brush plating.Product FeaturesHighly absorbent microfiber material for brush platingCompatible with suitable Betzmann Galvanik rod electrodes up to 8 mm in diameterDurable, fully stitched constructionChemically resistant when used with compatible electroplating solutionsSuitable for brush plating and tampon electroplatingCan also be used as an anode sleeve in bath electroplatingSuitable for Brush Plating and Tampon ElectroplatingThe absorbent microfiber material holds the electroplating solution effectively and supports smooth application during brush plating. The swab slides over a suitable rod electrode and is designed for practical everyday use in professional workshops and DIY electroplating applications.Important: The opening is relatively wide. For a secure fit, we recommend fastening the swab to the electrode with a thin rubber band. Alternatively, the opening can be held in place with a finger during brush plating.Also Suitable as an Anode Sleeve for Bath ElectroplatingThis versatile microfiber swab can also be used as a protective buffer around a rod anode during bath electroplating. It helps prevent direct contact between the anode and the workpiece. Suitability depends on the electrolyte and the specific plating process.Technical DetailsMaterial: MicrofiberDesign: Fully stitchedCompatible electrode diameter: Up to 8 mmApplication: Brush plating, tampon plating and use as an anode sleeveQuantity: 1 microfiber plating swabChoose quality electroplating accessories from Betzmann Galvanik for practical solutions in brush plating and bath electroplating.
Gold Electrolyte 2 g/L – Gold Plating Solution for Pen Plating, Brush Plating and Tank PlatingProduct DescriptionThis ready-to-use gold electrolyte contains 2 g/L gold and is suitable for electroplating compatible electrically conductive surfaces. It is intended for pen plating, brush plating and conventional tank plating, allowing suitable workpieces to be coated with a bright, yellow-gold finish.The gold plating solution is suitable for decorative gold plating, repair work, replating and suitable technical applications. Depending on the method used, the workpiece can be immersed fully or partially in the bath, or the gold coating can be applied selectively using a suitable plating pen or brush plating tampon.Its versatility makes this electrolyte an interesting choice for workshops, craft businesses, restoration work and professional surface finishing.Benefits and FeaturesReady-to-use gold electrolyte containing 2 g/L goldSuitable for pen plating and plating with a galvanic penSuitable for brush plating of localised areas and larger surfacesSuitable for conventional tank platingBright, yellow-gold depositSuitable for decorative and compatible technical applicationsSuitable for repair plating and replatingSuitable for jewellery, watches, metal components and compatible technical partsCan be used with suitable graphite, platinum or titanium electrodesReady to useTechnical DataParameterSpecificationProductGold electrolyte / gold plating solutionGold concentration2 g/LGold formBound gold-cyanide complexFree cyanidesAccording to the product information, none presentDeposit colourBright yellow goldApplicationsTank plating, pen plating and brush platingTank plating voltage2.0–4.0 VPen and brush plating voltage3.0–6.0 VOperating temperature20–40 °CSuitable electrodesGraphite, platinum or titaniumCurrent densityDepends on the plating method, effective surface area and operating conditionsConditionReady to useThe specified voltage ranges are guidelines for the respective plating methods. Suitable operating values depend on the equipment, electrode arrangement, contact area and actual working conditions.Current Density and CurrentCurrent density describes the amount of electrical current flowing per unit of effective plated surface area. It is expressed in amperes per square centimetre (A/cm²) and is an important parameter in electroplating.Current density is calculated by dividing the current by the effective surface area:Current density = Current ÷ Effective surface areaExample: A current of 0.5 A applied to an effective surface area of 50 cm² corresponds to a current density of 0.01 A/cm².This is a calculation example only and is not a confirmed operating recommendation for this gold electrolyte.For this specific 2 g/L gold bath, the appropriate current density must be determined from the manufacturer's technical specifications and the plating method being used. Values specified for a different gold electrolyte should not be adopted without verification.With pen plating and brush plating, the effective contact area also depends on the size of the plating head or the wetted tampon. Consequently, current density can be more difficult to determine than in conventional tank plating.Application for Pen PlatingPen plating allows individual spots, small areas and selected sections of a workpiece to be gold plated without immersing the entire component in a plating bath.The electrolyte is transferred to the prepared surface using a suitable plating pen or plating head. This method is particularly suitable for localised gold plating, repairs and replating.Typical ApplicationsRepair platingReplatingIndividual surfaces and sectionsEdges and detailed areasJewellery and jewellery componentsWatches and watch componentsElectrical contactsDecorative selective gold platingCompatible technical componentsSpecified voltage range: 3.0–6.0 VThe appropriate setting depends on the pen plating equipment and the application. In addition to voltage, the actual current, effective contact area and consistent wetting are important factors affecting the coating result.Application for Brush PlatingBrush plating is suitable for localised gold plating, larger sections and areas that cannot easily be coated by immersion in a tank.In this process, a suitable tampon is wetted with the gold electrolyte and moved across the prepared surface. The electrolyte is applied locally to the area being plated.Typical ApplicationsLarger surface sectionsRepair areasReplatingJewellery and decorative componentsTechnical componentsHard-to-reach surface areasWorkpieces that should not be fully immersedSpecified voltage range: 3.0–6.0 VApplication Instructions1. Prepare the surfaceThoroughly clean and degrease the workpiece. Depending on the base material and coating system, suitable activation or an intermediate layer may be required.2. Prepare the electrode and tamponUse a graphite, platinum or titanium electrode suitable for the electrolyte and the plating system. Wet the tampon with the electrolyte in accordance with the equipment manufacturer's instructions.3. Check the electrical connectionsIn conventional metal electrodeposition, the workpiece is connected as the cathode to the negative terminal. The working electrode is connected to the positive terminal as required by the system. Check the connection instructions for the equipment before use.4. Set the voltageThe specified voltage range is 3.0–6.0 V. The actual current depends on factors such as the contact area, tampon, applied pressure and electrical resistance. The equipment manufacturer's operating specifications must be followed.5. Apply the gold coatingMove the wetted tampon evenly over the prepared surface. Maintain consistent movement, adequate wetting and stable contact.6. Inspect the resultCheck the plated surface for uniformity and adhesion. The achievable coating thickness depends on the operating conditions, surface preparation and plating time.Tank plating reference values cannot automatically be transferred to brush plating without verification.Application for Tank PlatingThis gold electrolyte is also intended for conventional tank plating, also known as immersion electroplating.In this process, the workpiece is immersed fully or partially in the gold bath. The surface to be plated is connected as the cathode, while the suitable anode is connected according to the plating system being used.Specified voltage range: 2.0–4.0 VThe appropriate operating voltage depends on the equipment, electrode arrangement, effective surface area and electrical resistance.Typical ApplicationsGoldsmithingRepair and restorationReplatingDecorative metal surfacesSelective gold platingTechnical componentsElectrical contactsJewellery and watchesCompatible metal workpiecesA suitable electrode arrangement and an even current distribution help achieve a more uniform coating.Suitable Base Materials and UndercoatingsProper workpiece preparation is essential for a high-quality gold coating. The surface must be clean, free from grease and suitable for the electroplating process.Depending on the material, suitable substrates may include:SilverCopperBrassBronzeNickelNickel-containing alloysOther suitable electroplatable metalsDepending on the substrate, application and requirements for adhesion and corrosion resistance, a suitable adhesion, barrier or intermediate layer may be necessary.A palladium or rhodium undercoat may also be appropriate, depending on the substrate and coating system. Suitability must be assessed for the specific application.Gold as a Bound Cyanide ComplexIn this electrolyte, the gold is present as a bound gold-cyanide complex. According to the product information, no free cyanides are present.This distinction is important for accurate chemical description: the statement “no free cyanides” does not mean that the product contains no cyanide compounds whatsoever.Gold Electrolyte 2 g/L – Versatile ApplicationsThis ready-to-use gold electrolyte containing 2 g/L gold is suitable for a variety of electroplating applications.Whether carrying out precision repair plating with a plating pen, localised or larger-area plating with a tampon, or conventional tank plating, the electrolyte is intended for compatible applications using all three methods.2 g/L gold – bright yellow-gold deposit – for pen plating, brush plating and tank plating.
Content: 0.05 Liter (€460.00 / 1 Liter)
K-Gold - Clear Gold Electroplating Solution – for Pen, Bath & Swab Plating (10 g) Professional cyanide-free gold electrolyte for selective and immersion plating The K-Gold electroplating solution is a premium, cyanide-free gold electrolyte designed for pen plating, swab (tampon) plating and bath electroplating. It is ideal for jewellery finishing, repair plating, precision components and controlled gold deposition on small parts. The solution deposits a high-purity gold layer (up to 24 K) with excellent adhesion and uniform thickness. It can be used pure or blended with coloured gold additives to achieve specific karat values and gold shades. Key Features & Benefits High-purity gold electrolyte (≈ 10 g Au/L equivalent) Cyanide-free formulation for safer professional use Suitable for three plating methods: – Pen plating – Swab / tampon plating – Bath (immersion) plating Excellent adhesion on nickel, copper, silver and brass (proper pretreatment required) Soft, burnishable gold deposit with high visual quality Technical Parameters Gold concentration: approx. 10 g/L equivalent Deposit purity: 99.9–100 % gold Operating voltage: – Pen / swab plating: from 3.5 V – Bath plating: 3 V (current-controlled recommended) begin with 0,1 Ampere pro cm2 Temperature: 20–25 °C Recommended anode: Carbon or platinised titanium (bath) Hardness: approx. 170–180 HV Density: approx. 19.0 g/cm³ Pen Plating Application Ideal for localised plating, repairs and touch-ups. Clean, degrease and activate surface Load plating pen or swab with K-Gold solution Apply 2–3.5 V Move evenly across the surface to build the layer Swab / Tampon Plating Application Best for controlled selective plating on larger areas. Soak swab with electrolyte Maintain gentle, even contact Keep voltage stable Repeat passes to achieve desired thickness Bath Plating Application For uniform full-surface gold plating of small components. Thorough surface preparation Fill plating bath with K-Gold solution Use carbon or platinised titanium anode Apply low current density at 2–4 V Rinse and dry after plating Notes Air-sensitive – reseal container immediately after use Can be mixed with gold colour additives for karat matching Suitable for decorative and functional gold coatings
Content: 0.05 Liter (€1,900.00 / 1 Liter)
X‑Gold / Goldstrike 4 g/L Electrolyte (BMG‑087.2) High‑Adhesion Gold Strike Plating Solution for Difficult Surfaces Short Description The X‑Gold / Goldstrike 4 g/L Electrolyte (BMG‑087.2) is a specialized gold plating solution with 4 grams of gold per liter designed to deposit thin, highly adherent gold layers. It is especially effective on challenging substrates such as chrome, stainless steels, and dental alloys, and it is ideal as a strike or adhesion layer before applying thicker gold or other metal coatings. Applications This gold strike electrolyte is suitable for: Thin adhesion gold layers on difficult‑to‑plate metals Base layers for thicker gold or precious metal coatings Decorative accents and conductive finishes Brush, tank, or pen plating applications Preparing surfaces so that subsequent plating achieves better adherence and finish How It Works (Simple Explanation) During electroplating, gold ions are reduced onto the workpiece surface under DC. This specific electrolyte is formulated to promote strong adhesion, even on substrates that are normally hard to coat: Prepare: Clean and degrease the surface thoroughly. Plating: Connect the workpiece as the cathode and apply voltage. Deposit: A thin, adherent gold layer forms. Continue: Use this layer as a base for thicker coatings or other metals. Benefits of X‑Gold / Goldstrike 4 g/L Electrolyte Excellent adhesion on chrome, stainless steels, and challenging alloys Adequate gold concentration for effective strike layers Uniform and reliable plating at moderate voltages Useful base for further electroplating steps Suitable for hobby, workshop, and professional uses Typical Parameters (Guidelines) PropertyValue / RangeElectrolyte typeAdhesion gold strike solutionGold content4 g/LVoltage~3–4 VTemperature20–25 °CAnode materialCarbon or platinumDeposition rate~0.07–0.09 µm/min (spot)Recommended thickness~0.1 µmGold purity in deposit~99–99.5 %Hardness~185 HVDensity~19.3 g/cm³pH~1.0Values are practical guidelines and may vary with conditions. Application Tips Preparation: Clean and degrease surfaces thoroughly. Plating: Operate within recommended voltage and temperature ranges. Use carbon or platinum electrodes for best results. Post‑Treatment: Rinse with clean water and dry. Can be a base for thicker gold or other precious coatings. Safety Information Wear protective gloves, goggles, and suitable clothing Avoid contact with skin and eyes Rinse thoroughly with water if contact occurs Work in a well‑ventilated area Do not ingest; keep out of reach of children Dispose according to local chemical waste regulations Contains substances classified as hazardous with irritation and environmental effects. Conclusion The X‑Gold / Goldstrike 4 g/L Electrolyte delivers thin, strong‑adhering gold layers that are especially effective on surfaces that are difficult to plate with standard solutions. Its reliable performance makes it an excellent choice as a strike layer or base for further electroplating processes.
Content: 0.05 Liter (€700.00 / 1 Liter)
Smoky Chrome / Black Chrome Plating Solution BMG-108.3 – Dark Metallic Chrome FinishProfessional Smoky Chrome Electrolyte for Black Chrome PlatingThe Smoky Chrome / Black Chrome Plating Solution BMG-108.3 from Betzmann Galvanik is a professional electroplating electrolyte designed to produce a dark, metallic chrome finish.Depending on the substrate, surface preparation and plating parameters, the resulting finish can range from dark grey and anthracite to a deep smoky black metallic appearance.Smoky Chrome is particularly suitable for applications where a high-quality dark metallic finish is required and can provide an interesting alternative to conventional black rhodium or black ruthenium finishes.Typical applications include jewellery, watches, automotive parts, design objects, electronics housings, fittings and high-quality metal components.What Is Smoky Chrome / Black Chrome?Smoky Chrome is a galvanically deposited dark chrome coating with a metallic appearance.The final colour and gloss level depend strongly on the surface preparation and the underlying coating.Depending on the process, the appearance can range from:Dark Grey → Anthracite → Smoky Black → Deep BlackThe best results are generally achieved on smooth, polished nickel, copper or gold surfaces and other suitable conductive substrates.Because the coating is very thin, it follows the existing surface structure very closely.The better the underlying surface is polished and prepared, the better the final Smoky Chrome finish will look.Ideal for Jewellery, Watches, Automotive Parts and Design ObjectsSmoky Chrome is particularly attractive wherever a premium dark metallic appearance is required.Typical applications include:Jewellery and jewellery componentsWatches and watch componentsAutomotive trimAutomotive componentsDoor handles and fittingsBathroom fittings and accessoriesElectronics housingsMobile phone housingsLuxury and design productsMetal accessoriesDecorative metal objectsModel makingSpecial componentsRestorationHigh-quality metal partsThe coating is especially interesting for frequently handled components where a hard, durable and visually distinctive surface is desired.Smoky Chrome as an Alternative to Black Rhodium and Black RutheniumWhen a dark metallic finish is required, black rhodium and black ruthenium are commonly considered.Smoky Chrome provides another option:Dark to black metallic appearanceCharacteristic chrome finishHigh surface hardnessVery thin electroplated coatingSuitable for decorative applicationsMetallic rather than painted appearanceThis makes Smoky Chrome particularly attractive for customers looking for a premium black metallic surface.Suitable Substrates and UndercoatsThe final appearance and quality of the black chrome coating depend heavily on the underlying surface.Suitable substrates or intermediate coatings can include:Nickel coatingsCopper coatingsGold coatingsGold flash coatingsOther suitable conductive surfacesFor a high-quality decorative finish, a smooth, polished nickel or gold intermediate layer is recommended.For example, brass components can first be provided with a suitable nickel or white bronze intermediate layer before applying the Smoky Chrome coating.Perfect Surface = Perfect Smoky Chrome FinishSmoky Chrome is not a coating designed to hide poor surface preparation.Quite the opposite:The coating reproduces the underlying surface structure very clearly.We therefore recommend the following preparation:Mechanically finish and polish the surfaceCompletely remove polishing residuesThoroughly degrease the workpieceActivate the surfaceRinse thoroughlyApply the Smoky Chrome coating without unnecessary delayGrease, oxides and other contamination can significantly affect the quality and adhesion of the coating.Activation Before Smoky Chrome PlatingThorough activation is particularly important for sensitive or noble-metal substrates.For suitable gold surfaces, for example, activation with 10% sulfuric acid can be used. The Betzmann Galvanik Smoky Chrome instructions specify activation of gold surfaces with 10% sulfuric acid for approximately 1–2 minutes, followed by thorough rinsing.The exact pretreatment must always be adapted to the particular base material and existing intermediate coating.Suitable for Bath, Pen and Tampon PlatingThe Smoky Chrome BMG-108.3 electrolyte can be used for different electroplating techniques, depending on the equipment and application.Bath PlatingIdeal for:JewelleryFittingsAutomotive componentsDesign objectsMultiple workpiecesPen PlatingParticularly useful for:Repair platingLocalised coatingCorrectionsSmall areasDifficult-to-reach areasTampon PlatingParticularly suitable for:Local repairsPartial surfacesLarge individual componentsMobile electroplatingOn-site finishing and repair workRecommended ElectrodeFor the Smoky Chrome process, we recommend:✔ Carbon / Graphite✔ PlatinumCarbon or graphite electrodes are an economical and practical solution for everyday applications.Platinum electrodes offer excellent chemical resistance and can be used at the upper end of the recommended voltage range.Stainless steel anodes are not recommended for this process.Technical Specifications – Smoky Chrome BMG-108.3PropertySpecificationProductSmoky Chrome / Black ChromeArticle NumberBMG-108.3ProcessElectroplated Black ChromeVoltage9–11 VTypical voltage with carbonapprox. 10 VVoltage with platinumup to approx. 11 VTemperature20–30 °CRecommended electrodeCarbon/Graphite or PlatinumBrightness L*approx. 65–70%Chromium content of coatingapprox. 99%Remaining componentCarbonDeposition rate at 10 V / graphiteapprox. 2 µm/min (point plating)Maximum coating thicknessapprox. 3 µmHardness as depositedapprox. 800 HVHardness after heat treatmentapprox. 1,500–1,600 HVCoating densityapprox. 7.2 g/cm³Storage lifeapprox. 1–2 yearsHigh-Hardness Black Chrome CoatingOne of the key advantages of the Smoky Chrome system is the high hardness of the deposited coating.The freshly deposited coating reaches approximately:800 HVWith suitable heat treatment at approximately 220 °C, the hardness can increase to approximately:1,500–1,600 HVThis makes Smoky Chrome particularly interesting for decorative components that are regularly handled or exposed to mechanical wear.Thin, High-Quality CoatingThe black chrome coating is very thin, with a maximum thickness of approximately 3 µm.With point plating at 10 V using a carbon/graphite electrode, a deposition rate of approximately 2 µm per minute can be achieved.Actual plating time depends on the workpiece, current distribution, electrode movement, surface condition and plating method.Operating Temperature and VoltageThe recommended operating temperature is approximately:20–30 °CThe typical operating voltage range is:9–11 VWith a carbon/graphite electrode, approximately 10 V is typically used.When using a platinum electrode, the voltage can be increased to approximately 11 V.Optional Heat TreatmentHeat treatment is optional and is not necessary for every application.Where increased mechanical hardness is required, the finished Smoky Chrome coating can be heat-treated at approximately:220 °CThis can increase the hardness from approximately 800 HV to 1,500–1,600 HV.Smoky Chrome – Premium Black Metallic FinishUnlike paint or powder coating, Smoky Chrome produces a true electroplated metallic surface.The result can provide:✔ Dark grey to deep black appearance✔ Metallic finish✔ Premium anthracite appearance✔ Very thin coating✔ High hardness✔ Excellent decorative appearance✔ Suitable for frequently handled componentsImportant: Decorative Final CoatingSmoky Chrome is primarily intended as a decorative final coating.It should therefore not be marketed as a standalone corrosion-protection system. Corrosion resistance depends on the substrate, intermediate layers, coating quality, thickness and the complete coating system.For high-quality decorative applications, the correct undercoat and surface preparation are therefore essential.Safety InformationElectroplating chemicals must be handled using appropriate safety precautions.When working with the electrolyte:Wear suitable protective glovesWear safety glasses or face protectionUse suitable protective clothingAvoid skin and eye contactEnsure adequate ventilationDo not inhale aerosols, mist or vapoursRead the current Safety Data Sheet before useDispose of electrolyte residues according to applicable regulationsAlways follow the current product label and Safety Data Sheet.Betzmann Galvanik – Professional Smoky Chrome PlatingWith the Smoky Chrome / Black Chrome Electrolyte BMG-108.3, Betzmann Galvanik provides a professional solution for users looking to create a premium dark, metallic chrome finish.Whether for jewellery, watches, automotive components, design objects, electronics, fittings or special metal parts, Smoky Chrome opens up numerous possibilities for creating a distinctive black metallic appearance.Product Advantages at a Glance✔ Dark to deep-black metallic finish✔ Premium anthracite / Smoky Chrome appearance✔ Suitable for bath, pen and tampon plating✔ Carbon/graphite or platinum electrode✔ 9–11 V operating range✔ 20–30 °C operating temperature✔ Approx. 800 HV as deposited✔ Up to approx. 1,500–1,600 HV after heat treatment✔ Very thin coating up to approx. 3 µm✔ Ideal for jewellery, watches, automotive, electronics and design✔ Professional electroplating quality from Betzmann GalvanikBetzmann Galvanik – professional electrolytes, electroplating equipment, electrodes and accessories for high-quality surface finishing.
Content: 0.05 Liter (€360.00 / 1 Liter)
Platinum Electrode Ø 6 mm (BMG-008) Short Description The Platinum Electrode Ø 6 mm is a premium-quality electrode made from pure platinum, designed for demanding electroplating processes. With exceptional resistance to aggressive solutions and excellent conductivity, it is ideal for precious metal plating, precision surface finishing and reproducible high-quality results. Product Description Constructed from pure platinum, this electrode delivers highly stable, contamination-free current supply even in strongly oxidizing or chemically aggressive electrolytes. This ensures consistent deposit quality, color stability and structural integrity in your plating applications. With a diameter of 6 mm, it fits standard electrode holders and is suitable for bath, pen and pad plating. Typical Applications Precious metal plating (e.g., gold, silver, palladium, rhodium) Chrome and specialty coatings under challenging conditions Laboratory and precision electroplating R&D and prototyping Use with aggressive or oxidizing electrolytes Key Benefits Outstanding chemical resistance: ideal for aggressive plating baths Minimal contamination: keeps electrolyte and deposits clean High electrical conductivity: supports stable current flow and even coatings Long service life: performs well under frequent use Versatile compatibility: works with standard Ø 6 mm holders Usage Instructions Preparation: Thoroughly clean and degrease the workpiece before plating. Setup: Mount the platinum electrode as the anode, connect the workpiece as the cathode. Plating: Operate within recommended voltage and temperature ranges for best results. Maintenance: After extended use, gently clean any buildup to maintain performance. Conclusion The Platinum Electrode Ø 6 mm is a robust, highly reliable solution for demanding electroplating applications requiring chemical resistance, deposit purity and process stability. It is an excellent choice for professionals in workshops, labs and production environments.
Gold Electrolyte 8 g/L – 24K Hard Gold Plating SolutionProfessional Gold Electrolyte for Bath Plating, Pen Plating and Brush PlatingThe BMG-067 Gold Electrolyte from Betzmann Galvanik contains 8 g/L of gold and is designed for high-quality electroplating applications.Its specially formulated composition produces a hard, wear-resistant and uniform gold deposit with a hardness of approximately 220–230 HV.With a specified gold content of 99.9% in the deposit, this electrolyte is suitable for premium decorative and technical gold plating applications.The electrolyte can be used for conventional immersion plating as well as selective pen plating and brush plating.For applications requiring thicker gold coatings, deposits exceeding 10 µm can also be achieved under suitable operating conditions using an appropriate platinum electrode.Key Features and BenefitsGold concentration: 8 g/LSpecified gold content in the deposit: 99.9%24-karat gold platingDeposit hardness: approximately 220–230 HVGood wear resistanceSuitable for immersion and bath platingSuitable for pen platingSuitable for brush platingPlatinum or carbon/graphite electrodesStandard maximum deposit thickness according to manufacturer: approximately 5 µmDeposits exceeding 10 µm possible under suitable conditionsSuitable for decorative and technical applicationsTechnical Specifications and Operating ConditionsParameterManufacturer SpecificationProduct numberBMG-067Gold concentration8 g/LVoltage range3–5 VReference voltage3.5 VOperating temperature14–25 °CSuitable electrodesPlatinum or carbon/graphiteGold content in deposit99.9%Remaining deposit componentCarbonPlating rateApprox. 0.5 µm/min at 3.5 V with platinum electrode (spot plating)Cathodic efficiency35–40% at 3.5 V with platinum electrodeMaximum standard deposit thicknessApprox. 5 µmExtended deposit thicknessOver 10 µm possible under suitable conditionsDeposit hardness220–230 HVDeposit density19.3 g/cm³Internal stressMediumStorage requirementsProtect from direct sunlightShelf life1 yearHealth and safety classificationHarmful (manufacturer specification)Special ingredientsContains 0.3% potassium cyanideTransport classificationNo UN number; not classified as dangerous goods for transportRecommended Current Density and Operating VoltageThe recommended operating voltage range is 3–5 volts. The manufacturer's reference condition for the specified plating rate is 3.5 volts using a platinum electrode.For immersion bath plating, we recommend starting with a moderate current density and adjusting the operating parameters according to the workpiece geometry and deposit quality.Suggested starting values for practical trials:ApplicationCurrent DensityBath plating – starting range0.5–1.0 A/dm²Bath plating – extended trial range1.0–1.5 A/dm²Pen platingDepending on electrode and contact areaBrush platingDepending on swab size and contact areaThese current density values are suggested practical trial ranges and are not manufacturer-confirmed operating specifications.The optimum current density depends on the workpiece surface area, electrode distance, bath movement, temperature and component geometry.Voltage alone does not determine current density. We therefore recommend using a regulated DC power supply with adjustable current control.Calculation example:For a workpiece surface area of 20 cm² and a current density of 0.01 A/cm²:20 cm² × 0.01 A/cm² = 0.20 AThe current should be monitored and controlled throughout the plating process to achieve consistent coating results.Suitable Electrodes – Platinum or Graphite?This gold electrolyte can be used with both platinum and graphite/carbon electrodes.Platinum Electrode – Our RecommendationExcellent chemical resistanceLong service lifeSuitable for professional electroplating applicationsReference electrode for the manufacturer's specified plating rateParticularly suitable for thicker gold depositsFor professional applications, especially when aiming for gold deposits exceeding 10 µm, we recommend using a suitable platinum electrode.Graphite / Carbon ElectrodeEconomical alternative to platinumSuitable for compatible electroplating applicationsInteresting option for larger electrode surfacesSuitable for various bath and selective plating applicationsImportant: We strongly advise against using stainless steel anodes for most of our electroplating processes.Gold Deposits Exceeding 10 µmThe manufacturer's specified standard maximum deposit thickness is approximately 5 µm.For applications requiring thicker gold coatings, deposits exceeding 10 µm can also be achieved under suitable process conditions.For these applications, we recommend using a platinum electrode and carefully controlling the current and other operating parameters.With increased deposit thickness, particular attention should be paid to uniform deposition, adhesion and electrolyte stability.The achievable thickness depends on the actual plating setup and must be verified under the intended operating conditions.Suitable ApplicationsThis 8 g/L gold electrolyte is suitable for:Jewellery and jewellery componentsWatches and watch componentsMetal fittings and decorative partsHigh-quality decorative objectsRestoration and repair gold platingElectrical contacts and metal componentsTechnical surface finishingIndividual and custom plating applicationsWorkpiece PreparationThe adhesion and quality of the gold deposit depend heavily on proper surface preparation.Before plating, the workpiece must be thoroughly cleaned, degreased and, where necessary, activated.Depending on the substrate material, such as stainless steel, copper, brass, silver or steel, a suitable intermediate layer or adhesion treatment may be required.Proper surface preparation is essential for achieving a durable, uniform and well-adhering gold coating.Storage and Shelf LifeStore the gold electrolyte protected from direct sunlight.The manufacturer's specified shelf life is one year when stored under suitable conditions.Betzmann Galvanik – Your Partner for Professional ElectroplatingBetzmann Galvanik supplies high-quality electroplating electrolytes and the corresponding equipment for professional surface finishing.Our product range includes:Gold, silver, platinum and rhodium electrolytesElectroplating equipment and regulated DC power suppliesGraphite and platinum electrodesAnodes and anode padsComplete systems for bath platingAccessories for pen plating and brush platingBenefit from our many years of experience in electroplating technology and our personal technical support.Order your 8 g/L Gold Electrolyte now and achieve high-quality 24-karat gold deposits with Betzmann Galvanik.
Content: 0.05 Liter (€1,300.00 / 1 Liter)
Anode Fabric Pad Sleeve Fluffy BMG-015 – Uniform Coating & Maximum Control The Anode Fabric Pad Fluffy BMG-015 is a specially designed accessory for pen plating and tampon electroplating, ensuring consistent electrolyte distribution and controlled coating processes. Thanks to its fluffy, high-volume structure, the pad absorbs electrolyte efficiently and releases it evenly and continuously onto the surface. This results in clean, uniform and high-quality metal coatings, even in demanding applications. Key Benefits at a Glance Excellent electrolyte absorption and release Uniform liquid and current distribution Ideal for precise and controlled plating Suitable for: Pen plating Tampon plating Reduces streaking and uneven deposits Flexible and easy to replace Applications Selective metal plating Repair and touch-up work Fine detail applications Jewelry finishing Technical surface treatments Technical Parameters Product Type: Anode fabric pad (fluffy) Item Number: BMG-015 Material: High-absorbency textile fabric Structure: Fluffy / high-volume Function: Electrolyte carrier for anode applications Application Areas: Pen plating Tampon plating Electrolyte Absorption: Very high Electrolyte Release: Even and controlled Current Distribution: Supports uniform deposition Reusability: Limited (depending on application) Replacement: Quick and easy Application – Step by Step 1. Preparation Soak the fabric pad with the appropriate electrolyte Allow excess liquid to drip off slightly Attach to the anode or plating pen 2. Pen Plating Application Move the pad evenly across the surface Maintain consistent contact Control voltage and movement Ensures precise and clean results 3. Tampon Plating Application Use the pad as an electrolyte carrier Apply even pressure Maintain continuous motion Ideal for selective plating applications Pro Tips for Best Results Replace pad regularly for consistent quality Avoid over-saturation → better control Uniform movement prevents streaks Always use clean electrolyte Conclusion The Anode Fabric Pad Fluffy BMG-015 is an essential accessory for achieving precise, uniform and high-quality results in pen and tampon electroplating. It ensures optimal control, clean finishes and significantly improved coating performance.