Gold Flash - Goldflash

Real Gold

€23.21*

Content: 0.05 Liter (€464.20* / 1 Liter)

(€19.50 ohne MwSt.)

Prices incl. VAT plus shipping costs

Available, delivery time: 1-2 days

50ml

100ml

250 ml

500 ml

1000 ml

2000 ml

Product number: BMG-084

PDF offer

Create PDF offer for this product Tip: Add multiple products to the cart and create the offer there. Logged in users get an individualized offer.

Product information "Gold Flash - Goldflash"

Product information "Gold Flash" from Betzmann Galvanik

Gold Flash with 2 grams of gold per liter - wonderfully suitable as an intermediate layer or decorative layer.

The Gold Flash from Betzmann Galvanik has 2 main areas of application:

1. optical-decorative layer:

Gold is soft and needs the addition of cobalt as a hard abrasion resistant top layer, which is not included in this product.

Therefore, the gold layer from Goldflash appears somewhat lighter yellow.

Parts that are not subject to any stress, such as souvenirs, horseshoes for decoration, etc., can be easily, directly and inexpensively gold-plated with the Goldflash.

Tip: You can first gild parts very intensively and thickly with the Goldflash and then coat them briefly with the 8 or 12 gram cobalt-displaced hard gold!

2. bonding primer for the following coatings:

Many applications require thin layers of gold before actual plating. Until now, this was only possible with the use of 24 carat gold and was therefore quite costly.

cost-intensive. This is now a thing of the past.

With the Goldflash from Betzmann Galvanik, you can now apply the desired gold layer.

As an example, direct silver plating of nickel is usually not feasible, so you can first gold plate with the Goldflash, then silver plate.

Likewise, when using black chrome, rose gold plating, green gold plating, the gold flash serves as an optimal bonding base when copper or nickel cannot be applied directly!

Also, gilding nickel, which naturally oxidizes, is very easy and spotless.

Then chrome plating on Goldflash can be done even easier and without problems.

Despite gold plating, the material input is far below 10 cents per cm2 of surface!

Recommended electrode: platinum electrode, graphite electrode

Voltage: from approx. 4 volts

Procedure:

Polishing if necessary

Degreasing

Activate

Goldflash

Continue with the top layer chrome, white gold, rose gold, green gold

Feature	Used for
Allows electroplating of a thin layer of strongly adherent gold.	Before applying another layer of plating, for example when silver or palladium plating on stainless steel, nickel and its alloys. 24 carat thin coats of gold: electronics, optics – reflectors – and where the item is going to be protected with a clear lacquer layer.

Operating Conditions and Deposit Data

Voltage Range	4.0 – 6.0 volts
Temperature	14 – 25 °C
Gold Concentration	2g/l
Electrode	Platinum or Carbon (see notes)
Gold content in plate	99.9% (balance carbon)
Plating Rate at (5.0 volts, Platinum electrode)	Approx. 0.12 micron per minute (spot)
Hardness	180 – 190 Hv
Density of deposit	19.0 g/cm3
Stress	Low – medium stress
Special storage requirements	Away from sunlight
Shelf life	Over 3 years

Notes:

We strongly advise against the use of stainless steel anodes for most of our plating processes
Plating rates are calculated over a sample area which is permanently covered by swab.

Features	Used for
Designed mainly as a base solution for mixing with our Coloured Gold Mixers	Mixing with Yellow, White, Rose, and Green Gold Mixers and Brass Effect Gold Mixer.
Can be mixed with 2 or more Gold Mixers	Creating a huge spectrum of different shades and tints of gold – good for exactly matching colour of original gold plated layer
Can be plated on its own, forming a soft, 24 carat gold layer, completely cyanide free	Mainly functional purposes only. Needs a Gold Flash undercoat if plating on to stainless steel

GHS07

Signalword : Warning

H-phrases:

H332 Harmful by inhalation.

H312 Harmful in contact with skin.

H302 Harmful if swallowed.

P phrases:

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P301 IF INFECTED:P310 Immediately call a POISON CENTER/doctor/

Similar Items

Anode sleeve fuzzy

Anode pad / tampon / anode sleeve / fuzzy sleeve / replacement fabric pad puffy from Betzmann Galvanik. This puffy fabric pad / anode sleeve or also called tampon is absolutely recommended for all plating processes. Optimally suitable for all coatings and electrolytes. The coating of larger areas is also quite fast with this pad. The insertion hole is larger than the electrode and therefore it happens that the moist anode pad slips off. Therefore, fix the pad on the electrode with a small rubber band.

€2.38*

Gold Solution 4 Gramm /Liter

PRODUCT PRESENTATION - GOLD ELECTROLYTE 999 FINE GOLD - 23,8 CARAT WITH 4 GRAMS OF GOLD PER LITER Do-it-yourself gold plating has never been so easy. Our Gold Electrolyte from Betzmann Galvanik can be purchased by anyone. Whether it is for use in highly professional laboratories, industry, luxury companies, to the use in the hobby, main or secondary trade, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel, The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition. The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe. Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes. The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating! The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc.. Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more. Graphite electrodes can also be used. Gold content: 4 grams per liter The procedure for gold plating: It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts Operating Conditions and Deposit Data Plating Factor 0.01 A/cm2 Plating rate 0.12 micron per minute at 0.01A/cm2 Maximum plating thickness 4 microns Temperature 18 – 25 °C pH 4.4 – 5.0 Gold concentration 4 grams per litre Agitation Low Electrode Mesh or Platinum Rod Electrode Gold content in plate 99.9% (balance carbon) Cathode efficiency ~25% at Plating Factor = 0.01A/cm2 Hardness 190 – 210 Hv Density of deposit 19.3 g/cm3 Stress Medium Special storage requirements Away from sunlight Shelf life 1 – 2 years Health and Safety classification Harmful Special considerations Contains potassium cyanide (0.15%) Transport (UN number) None: Not classified as dangerous for transport Signalword: Warning H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. EUH032 Contact with acids liberates very toxic gas. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.

Content: 0.05 Liter (€810.00* / 1 Liter)

From €40.46*

Details

Platinum Electrode

Platinum electrode from Betzmann-Galvanik: We know that when plating with gold or silver, you want to achieve only the best results and this is achieved by using our platinum electrode (platinized titanium). This will more than meet your requirements. It hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, we recommend the use of this electrode. Care should be taken to clean the electrode carefully after each use! Properties "Platinum Electrode 6 mm Platinum electrode (platinized titanium with a platinum layer of 2.5 µm platinum) Ø 6 mm x 100 mm Standard electrode for experiments in electrochemistry (electroplating, electrolysis, ion migration, determination of electrochemical potentials, etc.) Spare platinum electrode for Hofmann decomposition apparatus, electrolyzer Platinum-coated titanium anodes are among the classic anode materials for electroplating because they combine the excellent electrochemical properties of platinum with the good corrosion properties of titanium. They are characterized by a long service life at high current density and are versatile in use. They are equally suitable for platinum and ruthenium baths, for hard chrome plating, as bright rhodium baths and for cathodic corrosion protection. The standard platinum layer thickness is 2.5 μm. In order to achieve the best results when plating with gold (adhesive gold bath, bright gold plating bath) or silver, they are indispensable. This platinum electrode will more than meet your requirements, it hardly wears out and leaves no black spots or stains when plating. For top quality gold plating, I recommend using this electrode. Other possible applications: Water electrolysis/separation of hydrogen and oxygen, water disinfection, production of chlorates (chlorate synthesis) and perchlorates. Recommended operating data: Operating voltage from 3 volts distance anode/workpiece surface 5 cm anodic current intensity (specific current density) max. 75 A/dm² (7.5 mA/mm² = 750 mA/cm²), i.e. a multiple of the values typical in electroplating (0.5 ... 5 A/dm²) pH value: 0 - 11 Bath temperature max. 60 °C

€49.00*

Gold Solution 8 Gramm / Liter

PRODUCT PRESENTATION - GOLD ELECTRTOLYT 999 FINE GOLD - 23,8 CARAT WITH 8 GRAMS OF GOLD PER LITER Do-it-yourself gold plating has never been so easy. Our gold electrolyte from Betzmann Galvanik may be purchased by anyone. Whether it is for use in highly professional laboratories, industry, luxury companies, to the use in the hobby, main or secondary trade, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel, The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition. The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe. Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative causes a very long shelf life of at least 2 years and prevents sedimentation, as it occurs with many other gold electrolytes. The gold electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc.. Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm length or the flat platinum electrode, because platinum electrodes can build up very thick layers far over 10 microns and more. Graphite electrodes can also be used. Gold content: 8 grams per liter The procedure for gilding: Recommended to first polish the surface to a shine - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts Voltage Range 3.0 – 8 volts Temperature 14 – 25 °C Gold Concentration 8 g/l Electrode Platinum or Carbon (see notes) Gold content in plate 99.9% (balance carbon) Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.7 micron per minute (spot) Hardness 220 – 230 Hv Density of deposit 19.0 g/cm3 Stress Medium stress Special storage requirements Away from sunlight Shelf life 1 – 2 years Signalword: Warning H-phrases:H332 Harmful by inhalation.H312 Harmful in contact with skin.H302 Harmful if swallowed.EUH032 Contact with acids liberates very toxic gas.P phrases:P280 Wear protective gloves/protective clothing/eye protection/face protection.P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.

Content: 0.05 Liter (€1,213.80* / 1 Liter)

From €60.69*

Details

Dice set - gold-plated

Dice set - gold-plated Type: Gold-plated metal dice Weight: approx. 60g Size: see pictures Material: Copper-zinc alloy Features: 1. the gold numbers in easy-to-read font stand out clearly against the background. 2. the metal dice are made of environmentally friendly material, gold-plated, smooth, lightweight, durable, oxidation-resistant. Scope of delivery: 5 pieces of gold-plated dice

€22.61*

Stainless Steel Electrode 6mm

Stainless Steel Electrode 6mm: This electrode is ideal for chrome stripping and electro-cleaning. To swap over to a stainless steel electrode, simply loosen the existing electrode and fit in the new one. Stainless steel electrodes should not be used for any other processes such as the metal can cause contamination of the plating solution resulting in considerable wastage of gold metal. Selecting the best electrode for the job is very important.

€5.90*

Black Chrome - Smoky Chrome

Black Chrome - Smoky Chrome by Betzmann Galvanik This dark anthracite to slightly black shiny look is now popular for many car parts or cell phones and is a very good alternative to black rhodium or black ruthenium. Alternative to black rhodium or black ruthenium. Black chrome is a spectacular finish and always an eye catcher. Recommended electrode: Carbon Electrode 10 Volt - Platinum electrode 11 Volt. Plating on degreased copper, nickel, gold flash or any other gold plating. Operating Conditions and Deposit Data Voltage Range 9 – 11 volts (see notes) Temperature 20 – 30 °C Lightness (L*) of deposit 65 – 70% Electrode Carbon or Platinum Electrode (see notes) Chromium content in plate 99% (balance carbon) Plating Rate at (10 volts, Carbon Electrode) Approx. 2 micron per minute (spot) Maximum plating thickness 3 microns Hardness (as plated) 800 Hv (see notes) Hardness after heat treatment 1500 – 1600 Hv (see notes) Density of deposit 7.2 g/cm3 Stress Hi stress Special storage requirements None Shelf life 1 – 2 years Health and Safety classification Not classified as dangerous Special considerations None Transport (UN number) None: Not classified as dangerous for transport Notes: Heat treating at 220 °C increases the hardness of the deposit from 800 to 1600 Hv. The voltage should be raised from 10 volts if using a Carbon Electrode to 11 volts whenusing a Platinum Electrode. We strongly advise against the use of stainless steel anodes for most of our plating processes. Plating rates are calculated over a sample area which is permanently covered by swab. Labelling acc. to CLP-VO: Symbol word: Caution! H319 Causes severe eye irritation. P101 If medical advice is needed, have container or label at hand. P102 Keep out of the reach of children. P305 IF IN EYES:P351 Rinse cautiously with water for several minutes. P338 Remove contact lenses if possible. Continue to rinse. P337 + P313 If eye irritation persists: Get medical advice/attention.

Content: 0.05 Liter (€572.00* / 1 Liter)

From €28.60*

Details

High Speed Goldsolution 12 Gramm / Liter

PRODUCT PRESENTATION - HIGH SPEED GOLD ELEKTRTOLYT 999 FINE GOLD - 23,8 CARAT WITH 12 GRAMS OF GOLD PER LITER More gold in the electrolyte means even faster plating, thicker layers with the same working time or more surface area. Also the purchase of the high speed gold is cheaper, because you buy more gold per liter at a lower price. Do-it-yourself gold plating has never been easier. Our gold electrolyte from Betzmann Galvanik can be purchased by anyone. So whether it is for use in the highly professional use of laboratories, industry, luxury companies, to the use in the hobby, main or in the side business, companies, schools, universities, TH , IHK or other authorities. With this extremely fast and very hard depositing gold electrolyte from Betzmann Galvanik, you can usually coat the following metals directly: Stainless steel of all kinds, surgical steel, copper, silver, brass, nickel, iron, steel, The pink color of the electrolyte is the hardness additive cobalt. This gives the otherwise much too soft gold an abrasion resistant surface. This is not toxic in the admixed composition. The gold electrolyte from Betzmann Galvanik is anti-allergenic, was extracted from crisis- and conflict-free gold and is food-safe. Our Betzmann Galvanik Gold Electrolyte has a very fast deposition and further achieves a very hard gold layer. It has a very good covering effect and is therefore one of the best products on the market worldwide. A special preservative results in a very long shelf life of at least 2 years and prevents sedimentation, which occurs with many other gold electrolytes. The Gold Electrolyte from Betzmann Galvanik can be used for pen electroplating, pad electroplating and also for bath electroplating! The Gold Electrolyte from Betzmann Galvanik is used worldwide, e.g. for the gold plating of boat parts made of brass that are exposed to salt water, medical technology, measurement technology, for optical gold plating, for technical gold plating, gold plating of drive shafts, musical instruments and their parts, both inside and outside, body jewelry, intimate protection, dental jewelry, dental technology, drills of all kinds, shisa, e-cigarettes so-called. Vaporizers, vehicle parts, engine parts, motorcycle parts, airplane interiors, exhaust systems and manifolds, as gold is very heat resistant, sporting goods, diving equipment, keys and pendants, jewelry, chains and rings of all kinds, piston rods, pipes, table feet, bathroom fixtures and many more. Partial coatings are possible by masking and masking surrounding areas. To avoid material loss when coating sloping surfaces, we recommend our thickener/gel former. With this you can thicken all electrolytes also chrome remover, cleaner etc.. Also you can use with this gold mostly in the ratio 1:10 our mixer products like rose gold, white gold and green gold! Optimal results are achieved with the platinum electrode 6mm - 10cm long or the flat platinum electrode, since platinum electrodes can build up very thick layers far above 10 microns and more. Graphite electrodes can also be used. Gold content: 12 grams per liter The procedure for gold plating: It is recommended to polish the surface to a shine first - the nicer the surface, the nicer the shine will be Thorough degreasing with the electrocleaner Activate the surface with the activator Gilding with platinum electrode starting around 5 volts Operating Conditions and Deposit Data Voltage Range 3.0 – 8 volts Temperature 14 – 25 °C Gold Concentration 12g/l Electrode Platinum or Carbon (see notes) Gold content in plate 99.9% (balance carbon) Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.7 micron per minute (spot) Hardness 220 – 230 Hv Density of deposit 19.0 g/cm3 Stress Medium stress Special storage requirements Away from sunlight Shelf life 1 – 2 years Hazard statements according to Art. 25 (6) CLP Regulation: Signalwordt: Warning H-phrases: H332 Harmful by inhalation. H312 Harmful in contact with skin. H302 Harmful if swallowed. EUH032 Contact with acids liberates very toxic gas. P phrases: P280 Wear protective gloves/protective clothing/eye protection/face protection. P301 IF INSPECTED:P310 Immediately call a POISON CENTER/doctor.

Content: 0.05 Liter (€1,571.00* / 1 Liter)

From €78.54*

Details